Motorola XPR 7350

[Razores]

Hello Everyone,

I have 2 Motorola XPR 7350 radios but it only have 2 channels (1,2) I want to add another for my channel 3. I also have a Motorola XPR 8400 Repeater. Can someone help me pls.

Thanks

 

[N4GIX]

The XPR 7350 supports up to 32 channels. Add whatever you want for channel 3 using the CPS.

 

[cmdrwill]

You will have to add a Personality for each new 'channel'. Then you will have to add the Personality to the ZONE.

 

[KG4INW]

You will have to add a Personality for each new 'channel'. Then you will have to add the Personality to the ZONE.

Oddly enough, not so with MotoTRBO. Channels are created in each zone as you see fit but can "point" to items elsewhere in the CPS. That is, you define emergency systems, signaling systems, contacts, RX group lists and so on and so forth elsewhere in the tree but CPS doesn't refer to anything as a personality.

 

[Razores]

The XPR 7350 supports up to 32 channels. Add whatever you want for channel 3 using the CPS.

Hello,

What I want to do is to connect my radios to the repeater. And add channel to the radios using the repeaters frequency. I have installed the Dynamic Mix Mode for the repeater so I can also use the Analog ones. Can you help me on setting up the channel for my XPR 7350? I manage to link the two radios using the repeaters frequency but the TX mode and RX mode on the repeater is not functioning. I have no training for this and trying to learn it by myself.

Thanks

 

[Anderegg]

Assuming here you have MotoTRBO CPS?

In the CPS, after you read the radio, you should see your two existing channels on the left side tree menu under zone. With a right click above them, you can then ADD an additional analog or digital channel, at which point you will have a new right side field where you can enter the frequency, PL, etc.

Paul