• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Motorola XPR-7550 LTR

Status
Not open for further replies.

zsauve

Member
Joined
Jun 24, 2010
Messages
167
Location
Oak Creek, WI
I've seen from multiple sources that the XPR-7550 comes with LTR trunking built in however it must be activated when purchasing. How do I go about getting LTR enabled if I buy an XPR-7550 aftermarket & how much would it cost. Also, is there a seperate CPS needed to program the LTR trunking info or is it done through the standard Mototrbo CPS.
 
S

SARCommCoord

Guest
Contact your local Motorola dealer or contact Motorola directly.
 

mikewazowski

Forums Manager/Global DB Admin
Staff member
Forums Manager
Joined
Jun 26, 2001
Messages
13,459
Location
Oot and Aboot
The correct answer is it does through third party software installed on the option board.

You'll have to purchase that software which will come with its own programming software.

Check out Scholer-Johnson (SJI).
 

com501

Member
Joined
Sep 28, 2003
Messages
1,617
Location
127.0.0.1
The dealer you are renting service through will be able to program and authorize your radio for you without you have to buy the software from Morgan Johnson if he will sell it to you in the first place.
 
Status
Not open for further replies.
Top