• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

MTD programming questions.

Status
Not open for further replies.
merlin

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,511
Location
DN32su
Getting a replacement display board for my MTD, next will be programming, but hard to find any setup/ cables, info and such.
Ericsson cross reference has just led to confusion.
I had though this programs through the mic connector with a serial port cable,,am I wrong here ?
 
merlin

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,511
Location
DN32su
Correction, KMC 500M. Fixed the display and now have all the documentation I need. Now lets see what this little box will do.
 
merlin

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,511
Location
DN32su
Hey, thanks much.
I have all the programming cable diagrams as well as the ribless cables.
This KMC uses the TQ-3387.
Let me know if there is anything you need.
73s
 
merlin

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,511
Location
DN32su
I found the mic connector I was looking for, but attached to a rather expensive cable. may be stuck with- blue wire to plug4, green wire to plug2.............
 
Status
Not open for further replies.

Similar threads

Sunshineandmonkeys
How to build a TP9100 programming cable
Replies
0
Views
533
Sunshineandmonkeys
Sunshineandmonkeys
KC1UA
  • Locked
Airspy US - Disturbing and Ongoing Customer Service Issue
2 3
Replies
49
Views
5K
KevinC
KevinC
A
Kenwood: Kenwood TH-K20 Computer Programming
Replies
3
Views
790
KE5BCP
KE5BCP
TJX400
Command Center/Dispatch Console Build
2 3
Replies
52
Views
13K
pb_lonny
pb_lonny
k2cb
APX GCAI USB connection not responding
Replies
2
Views
615
k2cb
k2cb
Top