where do i get this program from? will it work with a 396t and 996t?
mtrunker
- Thread starter pinellasfirefighter
- Start date
- Status
Dewey
Member
- Joined
- Dec 19, 2002
- Messages
- 979
http://www.r00t.cz/radio/prog.php?p=mtrunker32&en=1pinellasfirefighter said:
Keep in mind that while MTrunker is a GREAT program, it is a bit dated, and I'm not sure that the author is still supporting it. Also, it should work with any discriminator tapped radio.
Dewey
is there another trunker program that does the same thing?
Dewey
Member
- Joined
- Dec 19, 2002
- Messages
- 979
In the early Bill Cheek days, Trunker/ETrunker was it. Now, there are so many siblings... Trunker/ETrunker, MTrunker, Unitrunker, WTrunker, T4Win, Trunk88, Treport, etc (sorry to the authors of any that I may have overlooked), that you are bound to get different opinions. With that said, my opinion is that Unitrunker is the latest and greatest out there right now. However, please keep in mind that some people will have other favorites because their favorite more tailor's to their need. An example would be Treport which to me, is more towards showing what a control channel is actually "talking" about opposed to following the talkgroups and radios.pinellasfirefighter said:
Dewey
EDIT: While I mentioned the "early Bill Cheek days", I am sincerely sorry for neglecting to mention Neal Fields, the leading author of Trunker/ETrunker.
Last edited:
where can i d/l these programs from?
Check the Trunked_Radio_Decoders section of the Wiki for some background and links for downloading each of these programs.pinellasfirefighter said:
i have the mtrunker download lol but i`m lost on how to set it up.. would anybody like to take the time to help me?
i have the 996t and 396t..
Have you modified either of these to provide discriminator audio?pinellasfirefighter said:
The reason I ask is - these programs decode the signal as provided by your radio. The signal must be discriminator audio - not speaker or headphone audio (which has been filtered).
-rick
newbie
Member
not enough you need to add in a discriminator tap. A lot of info on how for many radios is herepinellasfirefighter said:
http://www.discriminator.nl/index-en.html
the 396 and 996 are not on there but select another newer uniden and you will see where to place the tap. Not hard I have done this to a few radios. Just not ready to open up the 996 yet
i got this version 3.8.3 beta1 build4.. whats the splicer its said i dont need that for this version...
- Status