• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Multiple PL or mixed PL and DPL with Dual mode (p25/analog) quantar ?

Status
Not open for further replies.

ronenp

Member
Joined
May 8, 2002
Messages
508
Hi there
is there any way to operate more then single pl in a quantar that is operate in dual mode (p25/analog) ?
If the repeater work in analog only then it is possible to have it activated with a list of PL but when it is in dual mode it look like that only one PL can access it
is there any way of aloowing it to be keyed up with at least two PL or one PL and one DPL ?

without modifiying the hardware .... only by software ..... maybe a special firmware on the SCM or special codeplug ?
Thanks Forward
Ronen - 4Z4ZQ
Ronen Pinchooks (4Z4ZQ) WebSite
 

cmdrwill

Member
Joined
Mar 30, 2005
Messages
3,640
Location
So Cali
The Quantar can do multi PL/DPL ie Community Repeater. These are set up on a access list.
 

ronenp

Member
Joined
May 8, 2002
Messages
508
Indeed .... but
when you turn it to dual mode repeater (i mean analog+P25) you can put only one PL and no option for access list ....
 
Status
Not open for further replies.
Top