• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Baofeng my job has radio's and how to program them like a CB.

Status
Not open for further replies.

zigzagman95

Member
Joined
Sep 18, 2020
Messages
7
My job bought a bunch of baofeng UV-5R radio's. And how do you program them like a CB. For the Fm side that's that they are. just what to know what frequencies channel 1-40 are so it can be done the right way.
 

RaleighGuy

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
13,132
Location
Raleigh, NC
My job bought a bunch of baofeng UV-5R radio's. And how do you program them like a CB. For the Fm side that's that they are. just what to know what frequencies channel 1-40 are so it can be done the right way.

Those radios will not operate on the CB channels. You can use CHIRP to program them for legal frequencies, keep in mind, if you are using them for work you need to have FCC authorized and licensed frequencies, not just any set of numbers you choose to use as a frequency.
 

zigzagman95

Member
Joined
Sep 18, 2020
Messages
7
Those radios will not operate on the CB channels. You can use CHIRP to program them for legal frequencies, keep in mind, if you are using them for work you need to have FCC authorized and licensed frequencies, not just any set of numbers you choose to use as a frequency.
yeah going to do every thing by the book but just looking for the right info. New at this and do not what to get in to trouble with anyone.
 

chief21

Member
Premium Subscriber
Joined
Mar 2, 2004
Messages
1,798
Location
Summer - Western NC; Winter - Tampa Bay FL
Those Baofeng radios need to be properly programmed before use. Most VHF and UHF channels are not "channelized" like CB channels, and will require the correct frequencies, as well as bandwidth, subaudible tone (if needed), and other possible settings to make them work correctly in your situation. Incorrect settings could cause interference to other radio users or could prevent a radio fromm working altogether. If you're not familiar with two-way radio programming, it might be best to seek out someone to assist.
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,618
Location
Hiding in a coffee shop.
yeah going to do every thing by the book but just looking for the right info. New at this and do not what to get in to trouble with anyone.

Have your employer send them back. If you need CB's, then get CB's.

There are no license free channels you can legally use these radios on in the United States. The process for proper licensing through the FCC will cost a lot of money to do right, and it's not for the uninitiated. The process is complex to do correctly. After you go through all that and spend the money to get properly licensed, you are still stuck with cheap low quality radios.

Seriously, get some CB's if that's what you need.
 

R8000

Low Battery
Premium Subscriber
Joined
Dec 19, 2002
Messages
1,009
Have your employer send them back. If you need CB's, then get CB's.

There are no license free channels you can legally use these radios on in the United States. The process for proper licensing through the FCC will cost a lot of money to do right, and it's not for the uninitiated. The process is complex to do correctly.

To add to this, if your employer needs real radios, then they need to contact a local, reputable two way radio vendor. Most two way shops will assist you in getting a FCC license. Most will do all the paperwork for you.

You don't need expensive digital radios. Simple, analog only units are very affordable....and legal. A good sales rep will look at what your company needs are and recommend a solution for you. It could be as simple as some portable radio on a simplex channel or maybe renting airtime on a trunked radio system.

The best part of having a local two way shop is the ability to contact them is, if you have problems in the future, you will have someone to call instead of relying on a internet website.
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,618
Location
Hiding in a coffee shop.
If I have a proper radio what is the cost to get a specific frequency?

Depends on what you mean by specific frequency, and if you are referring to going through the frequency coordination/licensing process, or just simply programming the radio for use on a frequency you already have licensed.
 

K4EET

Chaplain
Joined
Feb 18, 2015
Messages
2,125
Location
Severn, Maryland, USA
@zigzagman95, it would help us to help you if you could tell us what type of business you are in. Then we could be more specific in helping you all to get the right radios for the right service. Do you need a dispatch position? Do you need a repeater? Or would CB radios suffice for you all (which I am not sure can legally be used for business operations - somebody help me here)? A little more specific information would help us out a whole lot in getting you the correct information.
 

vagrant

ker-muhj-uhn
Premium Subscriber
Joined
Nov 19, 2005
Messages
3,150
Location
California
I posted in your other thread on this as well. My guess is you are not in the USA, as there are several countries that use UHF for “CB”.


If you are in the U.S., then the posts in this thread are applicable.
 
Status
Not open for further replies.
Top