N-Win and Pro-2096

Status
Not open for further replies.
Joined
Mar 28, 2009
Messages
65
Location
South Sioux City,NE
Extended Trunking Tables for N-WIN.

Here is the Extended Trunking Tables for the PRO-2096 Scanner you will need to receive the N-WIN system.


CHI lo CHL hi Base Freq. Offset Step

0 4095 851.00625 0 6.250
4096 8191 762.00625 4096 6.250
0 0 0.00000 0 0.000
384 20479 150.57500 16384 2.500
20480 24575 149.00000 20480 2.500
24576 28671 161.00000 24576 12.500

Had to do it the old fashioned way and do the math, but I put it in my 2096 and getting clear signals now.

Ron
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
23,621
Location
Bowie, Md.
That's damn good work, Ron - something that probably belongs in the wiki. No doubt other 2096 and 96 users will ask exactly the same question...Mike
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
23,621
Location
Bowie, Md.
OK I put a little divider for the PRO-96 and 2096 using your table...

Nebraska Wireless Interoperable Network - the RR Wiki

Please take a look at that table; the alignment got really hosed when it got posted in the forum. In particular check that last line - the step in the last line is 12.5, but the 2 lines above it is 2.5. Let me know what needs to be fixed. Just click on section 6 in the table of contents.

Mike
 

SquierStrat

Member
Joined
Aug 22, 2008
Messages
771
Location
Fremont NE
Hello, and thank you for this information! I am curious though, how exactly does a person figure this out for themselves? I may be getting a pretty sweet deal on a pro 96, and would like to monitor the ORIN with it also..
 
Status
Not open for further replies.
Top