• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Nebraskan needs help-LPE200

Status
Not open for further replies.

Hobbyscan

Member
Premium Subscriber
Joined
Jun 10, 2009
Messages
64
I recently ordered a LPE-200 and would like to send it to someone in/near Nebraska for updating. Shows PERS VER as 24.00 and FLASH size as 1M. Would like to get it up to date and install Provoice (29)(has AEGIS/VG). Ultimately I'd like to have it programmed for the local FD (conv.) and PD (EDACS). If any of you folks could help I'd appreciate it. If not, I'll be in contact with RACOM anyway to get it set up on the system.
 

DisasterGuy

Member
Joined
Aug 24, 2013
Messages
1,255
Location
Maryland Shore
You are going to need a Harris Dealer/ASC to get an updated feature encryption string for unencrypted ProVoice. It should run you around $250. Do you already have an assigned LID on the EDACS system?
 

Hobbyscan

Member
Premium Subscriber
Joined
Jun 10, 2009
Messages
64
DisasterGuy, No not yet and that's why I need to talk with Racom. I'll have to get permission from the Communications director and have Racom allow me access to the system.
 
Status
Not open for further replies.
Top