ezernie
Member
- Joined
- Nov 19, 2004
- Messages
- 20
- Reaction score
- 0
I'm a bit fuzzy on programming. I set up this radio three or four years ago and was scanning mostly north meck county area. I reprogrammed it about a year ago after a long power loss, had a little trouble but finally got it right again. I used the list on the TrunkTracker site, Mecklenburg area.
About a month ago it stopped scanning the ID's in the bank I usually scan. I went back through, checked all frequentcies and ID settings again, reveiwed the manual again, but for some reason can still only get a few ID's to scan in one other bank. No loss of power this time so I feel something else may have happened or changed this time.
I've also noted there were no frequency numbers listed in the 'north' section at this site. Only, S. E. W.
What am I missing?
Thanks,
E.T.
About a month ago it stopped scanning the ID's in the bank I usually scan. I went back through, checked all frequentcies and ID settings again, reveiwed the manual again, but for some reason can still only get a few ID's to scan in one other bank. No loss of power this time so I feel something else may have happened or changed this time.
I've also noted there were no frequency numbers listed in the 'north' section at this site. Only, S. E. W.
What am I missing?
Thanks,
E.T.