• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

need to upgrade tk790 to cdf

Status
Not open for further replies.

jay12

Member
Joined
Jun 10, 2006
Messages
76
Hello I need to upgrade a few tk790s to the CDF firmware and the 256ch chip any one know Where can I get the firmware and chip
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,615
Location
Hiding in a coffee shop.
Your Kenwood dealer.

The CDF firmware is serial number specific, from my understanding. You will need the serial number for each radio that needs to be upgraded.
 

Duster

Supposedly Retired...
Database Admin
Joined
May 16, 2003
Messages
798
Location
Northwest KS
Do a Google search for Silverado Avionics out of Napa...contact them. The owner there is tops to deal with.

The alternative is to have your Kenwood dealer send it in for you.
 

com501

Member
Joined
Sep 28, 2003
Messages
1,617
Location
127.0.0.1
It is NOT serial number specific, but the fastest service will be gotten from Bob at Silverado. You will need to ship your radios in. You cannot get a field 'upgrade' for this flash.
 
Status
Not open for further replies.
Top