need your help with 996t zone3

Status
Not open for further replies.

balou

Member
Joined
Jun 23, 2008
Messages
17
Location
ontario
ok guys im in zone 3 cochrane county
im new to uniden scanners all my others are rs2096 and 96
i just bought a 996t with remote head for a clean install but having a heck of a time understanding the sites and groups and quick keys

is there a way to program this scanner like the 2096 with control channels only

like my 2096 i have in bank1 i have Zone1 bank2 zone 2 bank3 zone3 and same for zone 4
howi do i make banks with the 996t i dont get it lol


thanks again..if i keep having a hard time ill just swap it for another 1

any of your help would be greatly appreciated
 

torontokris

Member
Premium Subscriber
Joined
Feb 22, 2008
Messages
1,738
Location
Toronto Canada
system is like a bank (but with no pre-set definite bank # or size or channels).

sites (towers) can be made under that system (normally 1 for each tower u want to listen to).
and you can multiple sites per system

make zone 1 a system with quick key 1
zone 2 a system with quick key 2
zone 3 a system with quick key 3

your free to enter in all the zone frequencies in one SITE under one bank (like the 2096).. however unlike the 2096 radioshack the unidens scan ONLY the 1st control channel they find and will NOT continue to others untill it looses the signal

your better to put all the sites separate under the one bank

so
system = 1
sites = whitby, toronto, king, (all separate sites)
talkgroups = opp (group 1), ems (group 2)

what your doing with the 2096 would be
 
Status
Not open for further replies.
Top