New Fleetnet Site in Zone 2

[ocscan]

Tonight I logged Site 37 from Ottawa. the Control Channel was/is on 143.0700. Trunk88 is giving it a 99% decode, and my Pro-197 is decoding the P25 with very little motorboating. So far I have a total of 5 frequencies logged, and based on the TG's heard its likely coming in from east of Ottawa. Trunk88 is decoding the site name as MILRCR, and lists 02,04,05,06,07,08 and 09 as neighbors.

 

[kirk23]

I really doubt its east of Ottawa because its neighbours aren't including 03 Alfred or 34 Vankleek hill..i would be more inclined,to,think south west of Ottawa: maybe Kemptville area or west of that...there seems to be a gap in the area around Merrickville that could use a tower site according to the tower site map.

 

[davidmc36]

Coming in full bars here in Morewood. Some 2OPS34 traffic.
Perfect voice on the 396XT. Set search and store to see what comes up.

 

[davidmc36]

....maybe Kemptville area or west of that....

Maybe part of it was to fix that dead zone in downtown Kemptville. I always seem to get crappy reception in Kemptville. Winchester gets real scratchy and Prescott is not great either.

Will have to go out touring with the antenna off and track it down.

 

[Jay911]

If you average the lat/long of the advertised neighbors, you get 45.03250373, -75.66496912 which is very close to Kemptville. In fact, the flag is a few meters north of an OPP detachment.

I did a Geographical search on Spectrum Direct using the above coords and a 10km radius, and found that Bell Paging has a site called Millar's Corners which is actually several miles south of Kemptville at 44.96048, -75.58534.

 

[davidmc36]

Wow! haven't had the EVO N800 fired up in ages. T88 humming along.

 

[davidmc36]

If you average the lat/long of the advertised neighbors, you get 45.03250373, -75.66496912 which is very close to Kemptville. In fact, the flag is a few meters north of an OPP detachment.

I did a Geographical search on Spectrum Direct using the above coords and a 10km radius, and found that Bell Paging has a site called Millar's Corners which is actually several miles south of Kemptville at 44.96048, -75.58534.

Interesting, was at the brother-in-laws on Christmas Eve talking to him and some other guys from the VFD and they were talking about the going to P25 and a new site that was supposed to be firing up just down the road from his place on Townline Rd.

But is the Leeds-Grenville switch supposed to have anything to do with Bell?

 

[Jay911]

But is the Leeds-Grenville switch supposed to have anything to do with Bell?

I wouldn't know anything about "the switch", but Bell is the vendor for the provincial radio system. FleetNet is a Bell trademark.

 

[davidmc36]

I wouldn't know anything about "the switch", but Bell is the vendor for the provincial radio system. FleetNet is a Bell trademark.

They said all they knew was the new radios are P25 and were talking about the new site. His wife wants help setting up a scanner at home. Thinking ahead to figure out what she will need.

 

[mciupa]

Keep us informed, submit the data when ready and it will be added to the database.

 

[DaveH]

(deleted)

 

[davidmc36]

Tonight I logged Site 37 from Ottawa. the Control Channel was/is on 143.0700. Trunk88 is giving it a 99% decode, and my Pro-197 is decoding the P25 with very little motorboating. So far I have a total of 5 frequencies logged, and based on the TG's heard its likely coming in from east of Ottawa. Trunk88 is decoding the site name as MILRCR, and lists 02,04,05,06,07,08 and 09 as neighbors.

Are you getting six frequencies now?
At 14:19:09 I got "All trunks busy; 5 Voice channels in use"

 

[bpsmicro]

I'm getting it full-scale on the portable 15km west of Kemptville, so that definitely indicates a Kemptville-area location. They must still be programming it, because for the first couple of hours I was only getting the OPP TGs, and then just recently I started getting Kingston East (EMS). The timing actually corresponds with David's "all trunks busy" indication. So they may be adding TGs to the site list, and may have to play with the list (I can't imagine why we'd want 2OPS34 way out here, for example).
Still, it'll be nice to be able to use the portable at home for a change.

Brad.

 

[davidmc36]

I'm wondering if the terrain may be any different for listening while at work at Ottawa Airport. Depending on how planes are parked in the hangar sometimes I don't get Winchester form inside. Ottawa gets a bit quiet for OPP later at night. Sometimes I have to roll the toolbox out by the hangar doors!

 

[kirk23]

Tonight I logged Site 37 from Ottawa. the Control Channel was/is on 143.0700. Trunk88 is giving it a 99% decode, and my Pro-197 is decoding the P25 with very little motorboating. So far I have a total of 5 frequencies logged, and based on the TG's heard its likely coming in from east of Ottawa. Trunk88 is decoding the site name as MILRCR, and lists 02,04,05,06,07,08 and 09 as neighbors.

I am not a tech by any means,so this might be a stupid question, but 143.0700 is also the control channel for site 34 in Vankleek Hill...would they have 2 tower sites that close to each other using the same control channel freq? Line of site from Vankleek to Millar's corners is what..less than 50 miles?

 

[DaveH]

They must still be programming it, because for the first couple of hours I was only getting the OPP TGs, and then just recently I started getting Kingston East (EMS).

Brad.

According to my source, it was fully active on Dec. 16th, if not earlier.

Dave

 

[DaveH]

Interesting, was at the brother-in-laws on Christmas Eve talking to him and some other guys from the VFD and they were talking about the going to P25 and a new site that was supposed to be firing up just down the road from his place on Townline Rd.

But is the Leeds-Grenville switch supposed to have anything to do with Bell?

If you check TAFL, L&G licences show P25 on different frequencies (which have been
known for awhile) including site at Millar's Corners.

Dave

 

[DaveH]

I am not a tech by any means,so this might be a stupid question, but 143.0700 is also the control channel for site 34 in Vankleek Hill...would they have 2 tower sites that close to each other using the same control channel freq? Line of site from Vankleek to Millar's corners is what..less than 50 miles?

True, but there's topography involved...one might have asked all of a sudden why Site 34
was so strong.. Hopefully they know what they're doing, and we don't end up with a situation
similar to what a couple of other nearby sites had.

Dave

 

[davidmc36]

I am not a tech by any means,so this might be a stupid question, but 143.0700 is also the control channel for site 34 in Vankleek Hill...would they have 2 tower sites that close to each other using the same control channel freq? Line of site from Vankleek to Millar's corners is what..less than 50 miles?

I don't see that being an issue. I am in Morewood with antenna up 40 feet and can't get a sniff of VanKleek hill.

 

[Jay911]

Even if you could hear both control channels, systems have functions in place to keep them separate, like connect tones on Motorola Type II systems and NACs on P25 systems. (Scanners don't honor these features but professional radios do.)