New Tier III DMR system for Stelco Hamilton/Nanticoke?

[mbstone99]

It looks like Stelco here in the Hammer is either switched or is switching to a Tier 3 system.. I am seeing Network S1, Site S1-2, DCC 0 on 853.0750 (one of their old main channels used for the Con+ system) with a neighbour of site 1 (maybe someone down towards Port Dover can check to see if they changed from analog their old analog channels?).

Matt

 

[mbstone99]

They must be still bringing this system up as earlier I saw Site 1 pop up on 853.0000 (for a few hours them disappeared) with Site 2 still on 853.0750. Also seen Site 2 switch a bunch of times last night switch between Site 1 and 2.

Matt

 

[mbstone99]

So right now I have seen these active and this is my approximation to the what LCN goes to what frequency.

852.2250 CC 0 Possibly LCN 221/222
852.4500 CC 0 Possibly LCN 233/234
853.0750 CC 0 Not sure yet..
853.1000 CC 0 Possibly LCN 337/338

Matt

 

[mbstone99]

To add to my above.. On the new system I have seen TG 10,11, 12, 50, 60, 61, 80, 90, 104, 110, 150, 170 & 999 which would equate to if they use the same TG number/name combo as the old system, would be (10) Coke Oven Ops, (11) By Products Ops, (12) Coke Oven/By Products Mechanics, (13) Coke Over/By Products SD1 (have no idea what SD means), (50) Cold Mill Ops, (60) Finishing CS (Customer Service?), (80) Reg51 (no idea what Reg51 is), (90) Utils, (104) No idea.. bad decode or new, (110) Yard Services, (150) Docks, (170) Security, (999) Emergency. TG 10 (809 hits), 11 (148 hits), 12 (213 hits), 150 (444 hits), 170 (120 hits) which would make sense.

Matt