TwoToneDetect New TwoToneDetect in the works - Python based

[jhall1520]

I shortened it a lot, i tried copying it all and i had "The text that you have entered is too long (5508421 characters). Please shorten it to 24000 characters long" Error pop up,

Hope this helps!

Succesfully retrieved local tone info
Succesfully retrieved local tone info
Tone1
[584.8, 584.8, 584.8, 584.8, 584.8, 553.9, 553.9, 553.9, 553.9, 553.9]
360.0 371
360.0 690
360.0 831
360.0 992
360.0 1004
360.0 1002
360.0 967
247.0 981
360.0 1039
360.0 975
247.0 978
360.0 957
360.0 1016
360.0 1055
247.0 1046
360.0 1004
360.0 984
247.0 979
360.0 1025
360.0 991
360.0 1051
360.0 987
247.0 1006
360.0 942
247.0 1039
360.0 1025
360.0 980
360.0 982
360.0 998
247.0 1001
360.0 999
247.0 1002
360.0 990
360.0 934
247.0 988
247.0 1034
360.0 1057
360.0 1024
360.0 1032
360.0 1002
360.0 989
247.0 985
360.0 1046
360.0 973
360.0 976
360.0 993
360.0 1039
360.0 1014
247.0 974
360.0 1004
360.0 986
360.0 1026
360.0 988
247.0 988
360.0 978
247.0 968
360.0 982
360.0 994
247.0 1017
360.0 986
360.0 977
360.0 989
360.0 1002
247.0 1013
360.0 949
247.0 1010
360.0 1038
360.0 953
360.0 1003
360.0 1005
247.0 977
360.0 1006
247.0 987
360.0 987
360.0 964
360.0 966
360.0 1027
360.0 1044
360.0 957
247.0 969
360.0 993
360.0 972
360.0 967
360.0 1020
360.0 1008
360.0 1038
247.0 999
247.0 1022
360.0 985
247.0 981
247.0 931
360.0 985
360.0 1036
247.0 1038
360.0 999
360.0 1030
247.0 993
360.0 1008
360.0 995
360.0 949
360.0 1032
360.0 1010
360.0 960
247.0 980
360.0 952
360.0 1056
360.0 1061
360.0 1050
360.0 968
360.0 989
360.0 968
360.0 1017
360.0 1000
247.0 1009
360.0 1007
247.0 983
360.0 991
247.0 972
360.0 992
360.0 1007
247.0 1000
360.0 976
360.0 985
360.0 995
360.0 986
247.0 965
360.0 976
247.0 1005
247.0 1010
360.0 1015
360.0 1004
247.0 997
247.0 989
360.0 1008
247.0 1020
247.0 1018
360.0 1012
360.0 1014
360.0 1008
360.0 972
360.0 1003
247.0 1011
360.0 969
360.0 1014
360.0 1028
360.0 1037
360.0 970
360.0 1001
247.0 956
360.0 973
360.0 966
360.0 990
360.0 983
360.0 1017
360.0 1039
247.0 968
360.0 983
360.0 1024
247.0 989
360.0 978
360.0 1053
360.0 1047
247.0 982
360.0 936
360.0 1026
360.0 944
360.0 994
360.0 990
360.0 953
247.0 1023
247.0 991
360.0 945
247.0 1022
247.0 1006
360.0 974
360.0 972
360.0 965
247.0 1002
360.0 1040
247.0 1022
360.0 984
360.0 983
360.0 979
360.0 1043
360.0 1019
360.0 996
247.0 963
360.0 1003
360.0 961
360.0 1016
360.0 1013
360.0 982
360.0 956
247.0 1015
360.0 1000
360.0 981
247.0 987
360.0 1021
360.0 1033
247.0 1026
247.0 1009
247.0 991
360.0 1020
360.0 981
360.0 956
360.0 1044
360.0 1067
247.0 1003
247.0 1008
360.0 945
247.0 986
247.0 998
360.0 1030
360.0 980
247.0 1007
247.0 975
360.0 969
247.0 968
247.0 976
360.0 1023
360.0 1021
247.0 998
247.0 1051
360.0 989
247.0 1012
360.0 1011
247.0 956
360.0 979
360.0 1015
360.0 1017
360.0 954
247.0 966
247.0 953
360.0 1025
360.0 985
360.0 1050
360.0 1008
360.0 1048
247.0 1008
360.0 997
360.0 955
360.0 964
360.0 987
360.0 992
360.0 984
247.0 1030
360.0 1023
360.0 965
247.0 965
360.0 997
360.0 969
360.0 1011
247.0 973
360.0 974
360.0 1002
360.0 997
247.0 1010
360.0 1007
360.0 1016
247.0 1067
360.0 1001
360.0 1047
360.0 1041
360.0 986
360.0 1006
360.0 980
247.0 947
360.0 1037
360.0 1024
247.0 983
360.0 986
360.0 956
360.0 955
247.0 972
247.0 960
360.0 980
247.0 1022
360.0 1065
360.0 986
360.0 979
247.0 999
247.0 984
360.0 1052

 

[jhall1520]

Any luck?

I shortened it a lot, i tried copying it all and i had "The text that you have entered is too long (5508421 characters). Please shorten it to 24000 characters long" Error pop up,

Hope this helps!

Succesfully retrieved local tone info
Succesfully retrieved local tone info
Tone1
[584.8, 584.8, 584.8, 584.8, 584.8, 553.9, 553.9, 553.9, 553.9, 553.9]
360.0 371
360.0 690
360.0 831
360.0 992
360.0 1004
360.0 1002
360.0 967
247.0 981
360.0 1039
360.0 975
247.0 978
360.0 957
360.0 1016
360.0 1055
247.0 1046
360.0 1004
360.0 984
247.0 979
360.0 1025
360.0 991
360.0 1051
360.0 987
247.0 1006
360.0 942
247.0 1039
360.0 1025
360.0 980
360.0 982
360.0 998
247.0 1001
360.0 999
247.0 1002
360.0 990
360.0 934
247.0 988
247.0 1034
360.0 1057
360.0 1024
360.0 1032
360.0 1002
360.0 989
247.0 985
360.0 1046
360.0 973
360.0 976
360.0 993
360.0 1039
360.0 1014
247.0 974
360.0 1004
360.0 986
360.0 1026
360.0 988
247.0 988
360.0 978
247.0 968
360.0 982
360.0 994
247.0 1017
360.0 986
360.0 977
360.0 989
360.0 1002
247.0 1013
360.0 949
247.0 1010
360.0 1038
360.0 953
360.0 1003
360.0 1005
247.0 977
360.0 1006
247.0 987
360.0 987
360.0 964
360.0 966
360.0 1027
360.0 1044
360.0 957
247.0 969
360.0 993
360.0 972
360.0 967
360.0 1020
360.0 1008
360.0 1038
247.0 999
247.0 1022
360.0 985
247.0 981
247.0 931
360.0 985
360.0 1036
247.0 1038
360.0 999
360.0 1030
247.0 993
360.0 1008
360.0 995
360.0 949
360.0 1032
360.0 1010
360.0 960
247.0 980
360.0 952
360.0 1056
360.0 1061
360.0 1050
360.0 968
360.0 989
360.0 968
360.0 1017
360.0 1000
247.0 1009
360.0 1007
247.0 983
360.0 991
247.0 972
360.0 992
360.0 1007
247.0 1000
360.0 976
360.0 985
360.0 995
360.0 986
247.0 965
360.0 976
247.0 1005
247.0 1010
360.0 1015
360.0 1004
247.0 997
247.0 989
360.0 1008
247.0 1020
247.0 1018
360.0 1012
360.0 1014
360.0 1008
360.0 972
360.0 1003
247.0 1011
360.0 969
360.0 1014
360.0 1028
360.0 1037
360.0 970
360.0 1001
247.0 956
360.0 973
360.0 966
360.0 990
360.0 983
360.0 1017
360.0 1039
247.0 968
360.0 983
360.0 1024
247.0 989
360.0 978
360.0 1053
360.0 1047
247.0 982
360.0 936
360.0 1026
360.0 944
360.0 994
360.0 990
360.0 953
247.0 1023
247.0 991
360.0 945
247.0 1022
247.0 1006
360.0 974
360.0 972
360.0 965
247.0 1002
360.0 1040
247.0 1022
360.0 984
360.0 983
360.0 979
360.0 1043
360.0 1019
360.0 996
247.0 963
360.0 1003
360.0 961
360.0 1016
360.0 1013
360.0 982
360.0 956
247.0 1015
360.0 1000
360.0 981
247.0 987
360.0 1021
360.0 1033
247.0 1026
247.0 1009
247.0 991
360.0 1020
360.0 981
360.0 956
360.0 1044
360.0 1067
247.0 1003
247.0 1008
360.0 945
247.0 986
247.0 998
360.0 1030
360.0 980
247.0 1007
247.0 975
360.0 969
247.0 968
247.0 976
360.0 1023
360.0 1021
247.0 998
247.0 1051
360.0 989
247.0 1012
360.0 1011
247.0 956
360.0 979
360.0 1015
360.0 1017
360.0 954
247.0 966
247.0 953
360.0 1025
360.0 985
360.0 1050
360.0 1008
360.0 1048
247.0 1008
360.0 997
360.0 955
360.0 964
360.0 987
360.0 992
360.0 984
247.0 1030
360.0 1023
360.0 965
247.0 965
360.0 997
360.0 969
360.0 1011
247.0 973
360.0 974
360.0 1002
360.0 997
247.0 1010
360.0 1007
360.0 1016
247.0 1067
360.0 1001
360.0 1047
360.0 1041
360.0 986
360.0 1006
360.0 980
247.0 947
360.0 1037
360.0 1024
247.0 983
360.0 986
360.0 956
360.0 955
247.0 972
247.0 960
360.0 980
247.0 1022
360.0 1065
360.0 986
360.0 979
247.0 999
247.0 984
360.0 1052

 

[gmbaker13]

Have you changed your meter level settings I think they may be your problem check them out also check your radio and make sure the volume is not too high.

 

[jhall1520]

Where are the meter Settings?

I have adjusted the volume, with no luck

 

[DC31]

deleted post

 

[gmbaker13]

Sorry, I was thinking of a raspberry Pi there is no meter settings, but your radio may be too close to your computer I think you are getting interference from your computer in your radio you need to get your radio about 10 feet away from the computer I had the same problems with my system you will know when you are far enough away when the display stops scrolling frequencies on the computer like what you were showing. The only time it should show frequencies on the computer is when you receive a tone or a call.

 

[dlnorth]

Sorry, I was thinking of a raspberry Pi there is no meter settings, but your radio may be too close to your computer I think you are getting interference from your computer in your radio you need to get your radio about 10 feet away from the computer I had the same problems with my system you will know when you are far enough away when the display stops scrolling frequencies on the computer like what you were showing. The only time it should show frequencies on the computer is when you receive a tone or a call.

What about when people are talking on the radio? Should it not be displaying anything then? My display has always showed a bunch of random frequencies as people talked on the radio,but would alert when a valid tone set was detected.

 

[ffryan76]

When ever audio is present, on the source you are using, it will display what looks like random audio. This is normal. The program is "listening" for the set tones and sees voice as a frequency as well as tone.

 

[gmbaker13]

What about when people are talking on the radio? Should it not be displaying anything then? My display has always showed a bunch of random frequencies as people talked on the radio,but would alert when a valid tone set was detected.

Yes, when some one is talking you will see frequencies but when it is quit there should be blank that is when you know it is working. If it is not quit after a message your message will not be able to send it to the email.

 

[aaknitt]

v64 Released

Hi everyone,

I just posted v64 on the program page. I'm away from home so I haven't been able to test this as thoroughly as I'd like. Let me know if you run into any problems.

Version 64 Release Notes:
- Longtonelength limited to 8 seconds, Atonelength and Btonelength limited to 4 seconds
- remotely hosted tones.cfg info is retrieved based on timer rather than upon tone detection. Default is once per hour. Can be changed by adding update_interval parameter to remote.cfg file. update_interval = 30 would update every 30 minutes.
- Added ability to send "Admin Email" from TonesEditor interface (TonesEditorv7)
- Added version number to the GUI title bar
- Limited support for Port 25 SMTP server (untested)

A version for the Raspberry Pi is include in the ZIP file.

Thanks,

Andy

 

[DC31]

Hi everyone,

I just posted v64 on the program page. I'm away from home so I haven't been able to test this as thoroughly as I'd like. Let me know if you run into any problems.

Version 64 Release Notes:
- Longtonelength limited to 8 seconds, Atonelength and Btonelength limited to 4 seconds
- remotely hosted tones.cfg info is retrieved based on timer rather than upon tone detection. Default is once per hour. Can be changed by adding update_interval parameter to remote.cfg file. update_interval = 30 would update every 30 minutes.
- Added ability to send "Admin Email" from TonesEditor interface (TonesEditorv7)
- Added version number to the GUI title bar
- Limited support for Port 25 SMTP server (untested)

A version for the Raspberry Pi is include in the ZIP file.

Thanks,

Andy

Thanks for the update, Andy. All wonderful stuff. One question:

The change to a timer only affects retrieval of a remotely hosted tones.cfg, correct? The program still refreshes the list of email addresses from the local copy of tones.cfg every time a tone set is detected?

Sorry, I guess that is two questions.

jim

 

[FVFD23]

Program stops working

I open and run TwoToneDetect v63 on my computer. It works fine for a day or two then it will stop picking up the tone and I have to close and reopen the program to get it to work again. Version 56 never had this issue but I did get false messages. What will cause this to stop recongnizing the tones after a day or two of running the program?

 

[aaknitt]

v64 Re-Released

Thanks for the update, Andy. All wonderful stuff. One question:

The change to a timer only affects retrieval of a remotely hosted tones.cfg, correct? The program still refreshes the list of email addresses from the local copy of tones.cfg every time a tone set is detected?

Sorry, I guess that is two questions.

jim

Jim,

It does the timer-based update for both local and remote. Your comment made me realize that I should put the update_interval parameter in the config.cfg file rather than in the remote.cfg file. I just re-posted v64 with that change. These are the silly mistakes I make when I haven't looked at or thought about the code in months :roll:

Andy

 

[aaknitt]

I open and run TwoToneDetect v63 on my computer. It works fine for a day or two then it will stop picking up the tone and I have to close and reopen the program to get it to work again. Version 56 never had this issue but I did get false messages. What will cause this to stop recongnizing the tones after a day or two of running the program?

Are there any errors in your log.txt file after it stops working?

Andy

 

[wscott]

I just upgraded to V64 and it appears that the record timer is not working in this revision and is recording for 60 seconds. V63 stopped recording after 3 seconds of silence. I copied the config files without changing anything when I upgraded. Any ideas on what could be wrong?

 

[DC31]

dynamic recording

I also upgraded to v64Pi last evening. I checked the audio files for two pages this morning and it appears to be working fine. Attached are the analyses of the two events plus the config information. Mine is set to record for 20 seconds and then listen for 4 sec of silence.

Hmm..., did the update_interval (60 default) get crossed up with the record_seconds in the Windows version?

 

[aaknitt]

I also upgraded to v64Pi last evening. I checked the audio files for two pages this morning and it appears to be working fine. Attached are the analyses of the two events plus the config information. Mine is set to record for 20 seconds and then listen for 4 sec of silence.

Hmm..., did the update_interval (60 default) get crossed up with the record_seconds in the Windows version?

Seems to be working correctly for me under Windows. wscott, make sure your audio squelch level is still ok. If the program is showing you frequencies (numbers) on the main screen during silence, you may need to bump up your audio squelch level a bit.

Andy

 

[FVFD23]

I happened again today. We received 2 pages that I received and but it never went off at our 18:00 test. I have shortened it up for you.



Succesfully retrieved local tone info
Succesfully retrieved local tone info
Tone1
Tone3
Tone4
[746.8, 746.8, 746.8, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5, 788.5]
[651.9, 651.9, 651.9, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8, 410.8]
[788.5, 788.5, 788.5, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8, 746.8]
279.0 25510
258.0 25510
354.0 980
354.0 1260
354.0 1377
354.0 1459
785.0 26978
785.0 26921
785.0 26976
785.0 27014
Frankfort Fire Tone Set Found
785.0 26996
785.0 26904
763.0 2532
Succesfully retrieved local tone info
Tone1
Tone3
Tone4
1188.0 3463
1209.0 3572
delay timer Frankfort Fire 14:55:24 on 11/30/13
2.0
838.0 3549
1000.0 3400
1032.0 3631
978.0 2815
1339.0 3663
1070.0 2965
457.0 25988
279.0 32767
247.0 25510
delay done Frankfort Fire 14:55:26 on 11/30/13
waiting for audio Frankfort Fire 14:55:26 on 11/30/13
threshold value: 64.0
starting record at 14:55:26 on 11/30/13
done recording at 14:55:26 on 11/30/13
217 max level at 14:55:26 on 11/30/13
threshold exceeded
recording audio Frankfort Fire 14:55:26 on 11/30/13
268.0 25511
247.0 25510
252.0 3395
252.0 25611
704.0 3375
290.0 31334
268.0 25757
247.0 9315
Waiting for Silence Frankfort Fire 14:56:08 on 11/30/13
Done recording Frankfort Fire 14:56:08 on 11/30/13
done writing WAV Frankfort Fire 14:56:08 on 11/30/13
258.0 1313
258.0 25510
252.0 19114
252.0 10570
252.0 4113
354.0 5089
354.0 1609
354.0 1058
354.0 1275
354.0 1393
done converting to MP3 Frankfort Fire 14:56:26 on 11/30/13
354.0 1423
354.0 1441
354.0 1504
360.0 1505
618.0 26530
338.0 25510
564.0 28374
1075.0 28849
1710.0 27802
505.0 27977
1559.0 27956
591.0 27682
1597.0 28301
1876.0 27825
994.0 27255
1037.0 27854
1860.0 27447
1806.0 8818
1806.0 8252
1070.0 3868
1021.0 2864
860.0 4747
1575.0 16392
935.0 3542
978.0 3932
672.0 27585
801.0 27894
629.0 27848
602.0 27477
1086.0 4173
1532.0 3663
1000.0 3024
935.0 3407
849.0 3232
1183.0 3923
1441.0 3001
785.0 2796
957.0 3726
908.0 3913
1188.0 3598
279.0 30476
247.0 25772
247.0 7975
MP3 Email sent! Frankfort Fire page received at 14:56:26 on 11/30/13 14:56:42 on 11/30/13
done converting to AMR Frankfort Fire 14:56:44 on 11/30/13
AMR Email sent! Frankfort Fire Page Received at 14:56:44 on 11/30/13 14:56:49 on 11/30/13
252.0 25510
252.0 25510
360.0 706
354.0 6001
247.0 25519
742.0 13689
742.0 26448
742.0 26638
742.0 27181
742.0 27091
785.0 26949
785.0 26954
785.0 26905
785.0 26987
785.0 26943
785.0 26896
785.0 26921
785.0 26872
785.0 26945
785.0 26925
785.0 26921
785.0 26951
785.0 26925
785.0 26894
785.0 26852
Frankfort Fire Tone Set Found
Succesfully retrieved local tone info
Tone1
Tone3
Tone4
delay timer Frankfort Fire 15:03:17 on 11/30/13
785.0 26967
2.0
785.0 26893
704.0 2422
742.0 3908
887.0 2733
941.0 3542
919.0 3340
892.0 3357
1339.0 3462
1156.0 3391
779.0 4367
delay done Frankfort Fire 15:03:19 on 11/30/13
waiting for audio Frankfort Fire 15:03:19 on 11/30/13
threshold value: 64.0
starting record at 15:03:19 on 11/30/13
516.0 27472
done recording at 15:03:19 on 11/30/13
31337 max level at 15:03:19 on 11/30/13
threshold exceeded
recording audio Frankfort Fire 15:03:19 on 11/30/13
258.0 31337
263.0 25515
247.0 25510
247.0 3273
349.0 10753
677.0 27033
1091.0 27645
575.0 26638
596.0 21639
752.0 26847
763.0 26738
1414.0 26490
833.0 3745
682.0 7195
731.0 3485
1016.0 3948
Waiting for Silence Frankfort Fire 15:04:01 on 11/30/13
Done recording Frankfort Fire 15:04:01 on 11/30/13
done writing WAV Frankfort Fire 15:04:01 on 11/30/13
957.0 3563
1016.0 3278
1172.0 3910
1156.0 2437
done converting to MP3 Frankfort Fire 15:04:01 on 11/30/13
1113.0 3749
1091.0 3083
1005.0 4104
559.0 27092
263.0 29670
252.0 11962
338.0 3383
247.0 25514
247.0 23205
354.0 2656
247.0 4225
247.0 3221
354.0 3256
301.0 25628
247.0 25510
247.0 3679
656.0 11657
645.0 26620
645.0 26610
645.0 26609
645.0 26661
645.0 26567
645.0 26499
580.0 26441
580.0 26238
580.0 26338
580.0 26352
580.0 26443
580.0 26315
580.0 26307
MP3 Email sent! Frankfort Fire page received at 15:04:01 on 11/30/13 15:04:10 on 11/30/13
580.0 26378
580.0 26411
580.0 26408
580.0 26415
580.0 26515
580.0 26376
580.0 26486
580.0 26386
580.0 26301
580.0 26240
785.0 2869
1199.0 3593
done converting to AMR Frankfort Fire 15:04:12 on 11/30/13
1054.0 3341
725.0 3414
543.0 11676
2409.0 5921
736.0 20173
838.0 25987
AMR Email sent! Frankfort Fire Page Received at 15:04:12 on 11/30/13 15:04:16 on 11/30/13
1102.0 22560
1935.0 8658
1166.0 6101
1204.0 27067
1274.0 26787
1193.0 15988
1269.0 21492
914.0 26907
1220.0 20596
973.0 4194
887.0 22052

 

[DC31]

I happened again today. We received 2 pages that I received and but it never went off at our 18:00 test. I have shortened it up for you.

742.0 13689
742.0 26448
742.0 26638
742.0 27181
742.0 27091
785.0 26949
785.0 26954
785.0 26905
785.0 26987
785.0 26943
785.0 26896
785.0 26921
785.0 26872
785.0 26945
785.0 26925
785.0 26921
785.0 26951
785.0 26925
785.0 26894
785.0 26852
Frankfort Fire Tone Set Found
Succesfully retrieved local tone info
Tone1
Tone3
Tone4
delay timer Frankfort Fire 15:03:17 on 11/30/13
785.0 26967
2.0
785.0 26893

What are your Atonelength and Btonelength settings in tones.cfg? Try a setting of 0.6 for the Atone and 1.0 for the Btone. It looks like you may have them set for that actual tone lengths of 1/3 and you are only sometimes gettting the entire tone length detected. Using the above suggested lengths you will be looking for .6 sec of Atone and 1 second of B tone. Normally a Quick Call 2 format has 1 second of A followed by 3 seconds of B, so you should easily be able to detect .6 sec A and 1.0 seconds of B.

It looks like you are trying to detect 3 seconds of B tone when in some cases the audio may only be feeding in 2.9 seconds so you miss it. Another one gets the full 3 second feed and you decode it.

Let us know what you find out.

Jim

 

[DC31]

I happened again today. We received 2 pages that I received and but it never went off at our 18:00 test. I have shortened it up for you.

742.0 13689
742.0 26448
742.0 26638
742.0 27181
742.0 27091
785.0 26949
785.0 26954
785.0 26905
785.0 26987
785.0 26943
785.0 26896
785.0 26921
785.0 26872
785.0 26945
785.0 26925
785.0 26921
785.0 26951
785.0 26925
785.0 26894
785.0 26852
Frankfort Fire Tone Set Found
Succesfully retrieved local tone info
Tone1
Tone3
Tone4
delay timer Frankfort Fire 15:03:17 on 11/30/13
785.0 26967
2.0
785.0 26893

You might improve your reliability a little also if you edit your Tone1 set to 742A/785B as those are the frequencies that are actually being detected.