TwoToneDetect New TwoToneDetect in the works - Python based

[Triton64]

TTDT

Hello all,
I just starting to get into the two tone detect program and am having some difficulty not getting anything to record. I'm somewhat confused with the steps posted on the website and trying to get everything setup. Any guidence and more specific help would be appreciated.

 

[krokus]

Hello all,
I just starting to get into the two tone detect program and am having some difficulty not getting anything to record. I'm somewhat confused with the steps posted on the website and trying to get everything setup. Any guidence and more specific help would be appreciated.

Post some details on your setup, and what errors you are seeing.

Sent via Tapatalk

 

[Triton64]

Post some details on your setup, and what errors you are seeing.

Sent via Tapatalk

I'm operating on a windows XP laptop, with a radio shack PRO-2017 desktop scanner that has a aux jack cable tied into the microphone input on the laptop.
I mainly am having trouble with making sure everything is correct to what is needed to make the recording happen and tied into audioboom. I'm not exactly sure what to set the delay recording time, and etc. Already have had a few calls but not being recorded even though I set up the tone numbers. Having difficulty understanding all that needs to be put in to make the whole thing function without me being at the computer at all times.

 

[DC31]

I'm operating on a windows XP laptop, with a radio shack PRO-2017 desktop scanner that has a aux jack cable tied into the microphone input on the laptop.
I mainly am having trouble with making sure everything is correct to what is needed to make the recording happen and tied into audioboom. I'm not exactly sure what to set the delay recording time, and etc. Already have had a few calls but not being recorded even though I set up the tone numbers. Having difficulty understanding all that needs to be put in to make the whole thing function without me being at the computer at all times.

Start by running the debug version of the program. When unzipped it two .exe files were created. Run the debug one so you can see error messages on the screen.

Here is a tone set, Atone is 757 and Btone is 1000:

https://drive.google.com/open?id=0B9sLdBjMInCVa0ZsekFERDRobVU

Play that tone set on your iPhone, iPod, Droid, or whatever with the audio cable connected from the earbud jack to your computer. (Device volume way up) This should cause numbers to scroll by. Once you have the numbers scrolling by, put those tones in as a tone set. Good places to start are delay = 0, Atonelength=0.6, Btonelength=0.6.

Then let us know what error messages you get.

 

[Triton64]

Start by running the debug version of the program. When unzipped it two .exe files were created. Run the debug one so you can see error messages on the screen.

Here is a tone set, Atone is 757 and Btone is 1000:

https://drive.google.com/open?id=0B9sLdBjMInCVa0ZsekFERDRobVU

Play that tone set on your iPhone, iPod, Droid, or whatever with the audio cable connected from the earbud jack to your computer. (Device volume way up) This should cause numbers to scroll by. Once you have the numbers scrolling by, put those tones in as a tone set. Good places to start are delay = 0, Atonelength=0.6, Btonelength=0.6.

Then let us know what error messages you get.

The debug stuff was working and reading the numbers. The error was email related. Such as can't send email in any of the formats such as mp3 or AMR. one of the links was rlated to this --> http://google.support couldn't get it all as the screen would expand very much.

 

[emt603]

Has anybody tried using TTD on a Windows 10 Machine? I have mine running on a Windows 7 Pro machine and thinking about letting it do the free upgrade to 10, but would like to know if TTD will have any problems with 10?

Mike

 

[wscott]

Seems to be working fine on my computer after updating to Windows10


Sent from my iPhone using Tapatalk

 

[wscott]

Update to my last: although it appears to be working, I noticed that the "Tone Frequency" does not change now regardless of what I set the "audio squelch level" to. It stays at No Audio.


Sent from my iPhone using Tapatalk

 

[Triton64]

The debug stuff was working and reading the numbers. The error was email related. Such as can't send email in any of the formats such as mp3 or AMR. one of the links was rlated to this --> http://google.support couldn't get it all as the screen would expand very much.

Anyone have any inputs for on this issue?

 

[slingshot202]

All,

I have two installations of this running, one at home which was a test system and one I implemented at my Fire Dept. I have the configurations pretty much the same and I am having an issue where the record time is not registering (or not stopping).

My recording is 1:21 (with I believe a 6 second delay). I had one suggestion earlier to lower the squelch to 200, I did that and I had no audio at all come over the program.

This long recording is causing issues with sending the MMS to AT&T and T-Mobile users as those systems reject the messages as to long and do not send the attachment.

I can continue to mess with the squelch, but any other reasons this would occur?

I do note what appears to be carrier noise after the talking (which may be what I am picking up). I have a scanner hooked up with PL Tones, I do not see audio noise in the system when Idle, but, I could always try turning down the mic input volume.....

 

[slingshot202]

All,

I have two installations of this running, one at home which was a test system and one I implemented at my Fire Dept. I have the configurations pretty much the same and I am having an issue where the record time is not registering (or not stopping).

My recording is 1:21 (with I believe a 6 second delay). I had one suggestion earlier to lower the squelch to 200, I did that and I had no audio at all come over the program.

This long recording is causing issues with sending the MMS to AT&T and T-Mobile users as those systems reject the messages as to long and do not send the attachment.

I can continue to mess with the squelch, but any other reasons this would occur?

I do note what appears to be carrier noise after the talking (which may be what I am picking up). I have a scanner hooked up with PL Tones, I do not see audio noise in the system when Idle, but, I could always try turning down the mic input volume.....

OK - so a brief update...I went to the system today and found I had a hum on the scanner/input. I turned down the mic input and so far not hearing the hum. Through TTD I was able to see the numbers moving during communications, which makes me believe that it is still receiving (as perplexed as I was).

Outside of a tone out before 1800, I will have to see what happens tonight. Hopefully I get the 1800 hour test or I have failed...if I get the pages and the audio is 30 seconds... then I have passed!

 

[longpointIL]

We have been having trouble getting the program to send out tones to email/phones.

We are running 67a.

This is one of the recent problem sets:

Duffy EMS Tone Set Found
delay timer Duffy EMS 09:48:22 on 08/11/15
0
delay done Duffy EMS 09:48:22 on 08/11/15
waiting for audio Duffy EMS 09:48:22 on 08/11/15
threshold value: 181.019335984
mono
1317.0 9314.66372901
1317.0 9008.2948381
1317.0 9200.90608636
threshold exceeded
recording audio Duffy EMS 09:48:22 on 08/11/15
1317.0 9538.21983443
1317.0 8953.05594124
1317.0 8968.93562091
1317.0 8742.70580762
1317.0 8903.31152269
1317.0 9280.86312025
1317.0 9099.16688379
1317.0 9015.67750185
1317.0 8960.13509176
1317.0 9368.84933523
446.0 1226.65500942
Traceback (most recent call last):
File "<string>", line 594, in mail
File "C:\Users\Andy\Google Drive\Python\build\pyi.win32\TwoToneDetect67a\outPYZ1.pyz/smtplib", line 242, in __init__
gaierror: [Errno 11001] getaddrinfo failed
Email not sent on attempt 2trying again in five seconds for Flanagan EMS page received at 09:47:27 on 08/11/15
Traceback (most recent call last):
File "<string>", line 594, in mail
File "C:\Users\Andy\Google Drive\Python\build\pyi.win32\TwoToneDetect67a\outPYZ1.pyz/smtplib", line 242, in __init__
gaierror: [Errno 11001] getaddrinfo failed
Email not sent on attempt 3trying again in five seconds for Flanagan EMS page received at 09:47:27 on 08/11/15

It only happens sometimes. Any suggestions?

 

[DC31]

We have been having trouble getting the program to send out tones to email/phones.

We are running 67a.

This is one of the recent problem sets:



It only happens sometimes. Any suggestions?

The snippet you have posted shows that a Duffy EMS tone was decoded, but the failure is for a Flanagan EMS tone decode. Did the emails go out for the Duffy call? Or did that one fail also? It appears that the program is having difficulty reading the list of email addresses. Check the Flanagan email list for any mistakes, incorrect formatting, etc. that might be causing it to fail.

 

[Triton64]

The debug stuff was working and reading the numbers. The error was email related. Such as can't send email in any of the formats such as mp3 or AMR. one of the links was rlated to this --> http://google.support couldn't get it all as the screen would expand very much.

Here is what debug is reading now:
Traceback (most recent call last):
File "<string>", line 204, in <module>
IndexError: list index out of range
Successfully retrieved local tone info at 21:06:23 on 08/15/15
Successfully retrieved local tone info at 21:06:23 on 08/15/15
Tone1
Tone2
Tone3
Tone4
[774.0, 1021.0, 1021.0]
[617.3, 617.3, 617.3, 688.8, 688.8, 688.8]
[527.0, 527.0, 527.0, 527.0, 527.0, 527.0, 527.0, 527.0, 602.0, 602.0,
602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0,
602.0, 602.0, 602.0, 602.0, 602.0, 602.0]
[941.0, 941.0, 941.0, 941.0, 941.0, 941.0, 941.0, 941.0, 865.0, 865.0,
865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0,
865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0]
Successfully retrieved local tone info at 21:06:23 on 08/15/15
Tone1
Tone2
Tone3
Tone4
838.0 924.100708352
779.0 638.854075251
758.0 720.035144699
1801.0 453.404871409
1634.0 4587.90912107
919.0 1833.16085132
763.0 3005.13146506


Any input on this????

 

[Triton64]

The debug stuff was working and reading the numbers. The error was email related. Such as can't send email in any of the formats such as mp3 or AMR. one of the links was rlated to this --> http://google.support couldn't get it all as the screen would expand very much.

Here is what debug is reading now:
Traceback (most recent call last):
File "<string>", line 204, in <module>
IndexError: list index out of range
Successfully retrieved local tone info at 21:06:23 on 08/15/15
Successfully retrieved local tone info at 21:06:23 on 08/15/15
Tone1
Tone2
Tone3
Tone4
[774.0, 1021.0, 1021.0]
[617.3, 617.3, 617.3, 688.8, 688.8, 688.8]
[527.0, 527.0, 527.0, 527.0, 527.0, 527.0, 527.0, 527.0, 602.0, 602.0,
602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0, 602.0,
602.0, 602.0, 602.0, 602.0, 602.0, 602.0]
[941.0, 941.0, 941.0, 941.0, 941.0, 941.0, 941.0, 941.0, 865.0, 865.0,
865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0,
865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0, 865.0]
Successfully retrieved local tone info at 21:06:23 on 08/15/15
Tone1
Tone2
Tone3
Tone4
838.0 924.100708352
779.0 638.854075251
758.0 720.035144699
1801.0 453.404871409
1634.0 4587.90912107
919.0 1833.16085132
763.0 3005.13146506


Any input on this????

got some of the issue resolved. Now trying to deal with the clips not being sent to email, tried both gmail and yahoo mail with no luck. any input???


Done recording Station 1 EMS 15:43:13 on 08/16/15
Done recording 2 EMS 15:43:13 on 08/16/15
done writing WAV Station 1 EMS 15:43:13 on 08/16/15
ffmpeg not found, sending as WAV file instead of mp3
done writing WAV 2 EMS 15:43:13 on 08/16/15
ffmpeg not found, sending as WAV file instead of mp3
Traceback (most recent call last):
Traceback (most recent call last):
File "<string>", line 594, in mail
File "<string>", line 594, in mail
File "C:\Users\Andy\Google Drive\Python\build\pyi.win32\TwoToneDetect67a_debug\outPYZ1.pyz/smtplib", line 242, in __init__
File "C:\Users\Andy\Google Drive\Python\build\pyi.win32\TwoToneDetect67a_debug\outPYZ1.pyz/smtplib", line 242, in __init__
error: [Errno 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
error: [Errno 10060] A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
Email not sent on attempt 1trying again in five seconds for 2 EMS page received at 15:42:20 on 08/16/15Email not sent on attempt 1trying again in five seconds for Station 1 EMS page received at 15:42:02 on 08/16/15

 

[fvchief]

Those Damn Tars!!!!!

Yes, you are at a spot where it gets tricky. Most have given up before now! Try downloading the file from google docs to your regular computer. Copy it to a usb stick, plug that into the pi, then get to the pi desktop (gui), open file manager there, and copy the file from your stick to the folder that you want. Then back to the command line and the tar command. I also find that Filezilla works well to transfer files.

How about moving this discussion to the TTD on a Raspberry P forum thread so we don't bore the Windows users?

Easiest way I found is to use startx, and through interent in gui download them. Use the file manager to move them to whatever folder you need. Then go back to scripting the unpack. Much faster.

 

[fvchief]

Pulse Audio is Killing Me

So I had TTD working on my Pi for 4 months. Now it doesnt' work. The last two weeks I've learned a LOT. One thing I figured out is that pulse audio 6 pretty much doesn't work for anyone doing anything. SO, I uninstalled, rolled back to pulse5. However, I still cannot get pulse to come online. I've enabled as system, root, and as a user. I've played with daemon, conf, etc and no success.

Any chance someone is willing to share their image? I've never gotten the one that Andy has available to work. I've gone through the long install process twice with success (ya, forgot to make an image when it was working). I need to get this back online!!!!

On the upside I have a usb receiver arriving any day. I'm going to attempt a TTD from scratch using the USB receiver (and not pulse audio). Like all the good people in here, I'll share an image if I have something of value.

Thanks

Lar

DoctorLar@gmail.com

 

[slingshot202]

Has anyone ever had the issue with too many recipients and the messages being returned? I have what appears to be 6 @vzwpix.com addresses returned with to many recipients, however, I send the messages BCC.

I am curious if VZW is not happy with the amount of messages being sent. As a added bonus, the alert sent out last night is my larger list and we had a "General" at 8:20pm and then another one at 8:42pm which is odd for us, but, did trigger another set of messages.

I also have one Verizon user who said he received the messages at 5:10am and his address was not the one listed in the cannot send to many recipients.

I did not receive any failures that I know for text message @vtext.com (nor any other service provider). Maybe chalk it up to to much to fast?

This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

97346####@vzwpix.com
host smtp.vzwpix.com [66.174.71.38]
SMTP error from remote mail server after RCPT TO:<97346####@vzwpix.com>:
452 #4.5.3 Too many recipients.: retry timeout exceeded
201452####@vzwpix.com
host smtp.vzwpix.com [66.174.71.38]
SMTP error from remote mail server after RCPT TO:<201452####@vzwpix.com>:
452 #4.5.3 Too many recipients.: retry timeout exceeded
973650####@vzwpix.com
host smtp.vzwpix.com [66.174.71.38]
SMTP error from remote mail server after RCPT TO:<973650####@vzwpix.com>:
452 #4.5.3 Too many recipients.: retry timeout exceeded
973632####@vzwpix.com
host smtp.vzwpix.com [66.174.71.38]
SMTP error from remote mail server after RCPT TO:<973632####@vzwpix.com>:
452 #4.5.3 Too many recipients.: retry timeout exceeded
973590####@vzwpix.com
host smtp.vzwpix.com [66.174.71.38]
SMTP error from remote mail server after RCPT TO:<973590####@vzwpix.com>:
452 #4.5.3 Too many recipients.: retry timeout exceeded
201247####@vzwpix.com
host smtp.vzwpix.com [66.174.71.38]
SMTP error from remote mail server after RCPT TO:<201247####@vzwpix.com>:
452 #4.5.3 Too many recipients.: retry timeout exceeded

 

[mckinscan]

TwoTone Finder

I download and started using the new twotonefinder and some how it not recording the audio tone. do anybody know how get the twotone finder audio record

 

[joey9797]

I have used 2tone for a while now and its great, I have just added some new members and I have 2 Android s6 Galaxy users that get the text but can not play the audio? If I text them the message from my phone it works and if I send it from a different email server for example network solutions vs gmail it works, so the pattern that I have figured so far is it just wont play an audio file if sent from gmail??? Anyone have any ideas?