Njsp Freq.help

[BIGTOMMY]

I Put Njsp Control Freq In Scanner And Hear Nothing . I Have Talk Groups
Loaded. Need Help On What To Do Next. 857.9625. 858.9625 859.9625 860.9625
Freq I Used. Is This The Correct Order. Are There Any Specific Talk Groups
To Be Installed To Hear Something Troup B North


Bc796d

 

[Highpockets]

Did you set up the system as a 800 type 2 and if your only going to enter the control channels you have to in the trunk menu turn on cc only forthat bank, lets start there.

 

[SCPD]

Njsp Freq. help.

Troop B, you need to input all frequencies in bank. Also, you can't use CC Mode only, you'll
miss transmissions. I found this out,when I was checking this out this week.

 

[SCPD]

Troop B, you need to input all frequencies in bank. Also, you can't use CC Mode only, you'll
miss transmissions. I found this out,when I was checking this out this week.

I use CC only, and I don't miss anything.

 

[SCPD]

Njsp Freq. help.

Ok. I just checked it out and i was wrong about not hearing everything. I should've looked at the display and i would've seen that it works that way. Sorry for misleading you BIGTOMMY, in the PM that i sent you.

 

[BIGTOMMY]

Njsp, Set Up Ok

Thank You All For The Help. Scanner Is All Loaded Up And Running Hot
On Njsp Troup B North. Never Heard So Much Coming In. Yesterday It Was Going Strong W/the Storm And All The Icy Cond On The Highways. A Lot
Of New Talk Groups Are On Also








______________________________
Bc796d, Bc396t,bc9000xlt, Bc780xlt 40 Ft Tower /w Vertical & Log Per Beam 2ooft Above Sea Level, Icom R71a