• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

no voice in the trunking mode....

Status
Not open for further replies.

gmen

Member
Joined
Mar 30, 2004
Messages
7
Reaction score
0
i have a pro 95, i programed a trunking sysytem. it stops on a freq but i can't here a voice. i see a VC and freq number with no sound. i think its a smartnet sysytem. anybody help...
 

scanfan03

Member
Joined
Jun 2, 2003
Messages
1,715
Reaction score
14
Location
Houston, Texas
VC= Voice Channel If you see that, then it should be talking. Do you have the volume up? Have you tried an external speaker? Do you have the bank in Open or Closed mode? Maybe your internal speaker is broken.


This is my 100th post!!!!!! :D :D :wink: :)
 

serebin

Member
Joined
May 16, 2004
Messages
41
Reaction score
0
Location
serebin
I have this same problem with a pro-96 and can't figure it out.

The ID will come up 47246 or whatever and then disappear. It acts as if I'm out of range or something but I know I'm not because this system is mixed mode and FM works fine for the same Police department.

Any ideas?
 

serebin

Member
Joined
May 16, 2004
Messages
41
Reaction score
0
Location
serebin
sweet i just found stuff that wasn't in my manual

funct -> trunk

func -> 2 or func -> 3. i set them up and i can hear junk now!
 
Status
Not open for further replies.
Top