rad1oreference
Member
I was looking at the database on here but didn't see the frequency for the North Hampton and Rye PD and FD
Anyone can assist?
Anyone can assist?
North Hampton and Rye
- Thread starter rad1oreference
- Start date
- Status
mainetrunk
Member
N. Hampton fire I believe shares Hampton fire, 154.145 pl 136.5... Their pd and Rye are dispatched on Rockingham's new repeater system, was simplex... 154.815-nac-117, Rock west, and 154.950-nac-117. Rock East. I beieve they use Rock East. I think Rye has a local channel, not sure.. I am looking at my OLD list, and see freqs I hope are accurate, its a few years old
151.8875-131.8-N.Hampton?
155.025-nac-830--Hampton pd
154.100-136.5--Kingston fire?
154.905-136.5-Newcastle?
156.225-136.5-N.Hampton local?
158.940-dc-116-- Newcastle link to 154.190?
156.240-94.8-Rye?
155.250-nac-ABE-Rye p25 pd?
Can anyone else help?
151.8875-131.8-N.Hampton?
155.025-nac-830--Hampton pd
154.100-136.5--Kingston fire?
154.905-136.5-Newcastle?
156.225-136.5-N.Hampton local?
158.940-dc-116-- Newcastle link to 154.190?
156.240-94.8-Rye?
155.250-nac-ABE-Rye p25 pd?
Can anyone else help?
KB1VLA
Member
Rye Fire is dispatched by Rock County on Seacoast Firenet, 154.190/136.5. Both N.Hampton and Rye PD are on Rock East, 154.815 NAC-117. North Hampton Fire is dispatched by Hampton Fire on their repeater, 154.145/136.5.
Correct Frequency, ROCK EAST
North Hampton and Rye police are indeed dispatched by the Sheriff's Office on ROCK EAST. However, 154.815 NAC-117 is the output for ROCK WEST. If you desire to monitor ROCK EAST to capture these departments, you need to program in 154.950 NAC-117 for ROCK EAST.
As a side note, even if you are only interested in those Departments located on ROCK EAST on the eastern side of the County, during the midnight shift and many times at the request of a code 1000, you may find your department of interest shifted to ROCK WEST. Best to have both programmed in for Rockingham County dispatched agencies!
North Hampton and Rye police are indeed dispatched by the Sheriff's Office on ROCK EAST. However, 154.815 NAC-117 is the output for ROCK WEST. If you desire to monitor ROCK EAST to capture these departments, you need to program in 154.950 NAC-117 for ROCK EAST.
As a side note, even if you are only interested in those Departments located on ROCK EAST on the eastern side of the County, during the midnight shift and many times at the request of a code 1000, you may find your department of interest shifted to ROCK WEST. Best to have both programmed in for Rockingham County dispatched agencies!
KB1VLA
Member
No, .815 is East, and .950 is West, just confirmed.
Plxnbury is correct, 950 is East, 815 is west.
I suspect he knows what he's talking about when it comes to Rock County, as do I...
KB1VLA
Member
I stand corrected, perhaps I was hearing a multi-select...?
rad1oreference
Member
I'll plug these freq and give it a try.
mainetrunk
Member
Theres a t-storm wrecking the Rye area, I just heard the 154.190-136.5 fire dispatcher tell the Rye respondants to use Rye DPW ANALOG, 156.240 94.8 (confirmed) which tells me, they might have p25 for the pd local...
mainetrunk
Member
I heard a p25 signal today on 156.240 on my Uniden 15X. Was too busy to hook up the 396XT.
mainetrunk
Member
I also got a pl of 173.8 this morning, possibly Middleton----156.240
SO what is the NAC for Rock CTY SO EAST AND WEST
KB1VLA
Member
156.240/173.8 is Westbrook, ME.
It's right there in the DB: Rockingham County, New Hampshire (NH) Scanner Frequencies and Radio Frequency Reference
well there is 4 different post that they are NAC 114 both east and west and or "Plxnbury is correct, 950 is East, 815 is west."
did they change is all I want to know
did they change is all I want to know
KB1VLA
Member
Those aren't NACs, those are frequencies. $117 is the NAC for both.
Ty
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
mainetrunk
Member
Westbrook, huh? thx KB1VLA
- Status
