• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

NX-5200 Key Noise

Status
Not open for further replies.

Remington12G

GØT AES?
Joined
Dec 20, 2018
Messages
948
I have had my NX-5200 for about 2 months now, I wrote an updated codeplug to my radio today and now when I press my key I have set up for backlight it emits a beep, I didn't have then on before and now I'm confused on how to turn it off in D1N. For reference, I have the emergency button set for a single push to activate the backlight.
 

Forts

Mentor
Database Admin
Joined
Dec 19, 2002
Messages
6,688
Location
Ontario, Canada
Is it thru a menu option perhaps? On the MotoTRBO gear I don't believe there is an option to enable/disable just the key beep in CPS, however it can be done via the utility menu in the radio.
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,615
Location
Hiding in a coffee shop.
Is it thru a menu option perhaps? On the MotoTRBO gear I don't believe there is an option to enable/disable just the key beep in CPS, however it can be done via the utility menu in the radio.

I know it's an option, usually under the 'audio' settings in the front panel menu. I don't have KPG-D1N here, so I can't check.
 

Remington12G

GØT AES?
Joined
Dec 20, 2018
Messages
948
Issue resolved. The AUX Key was no longer set to backlight somehow but now is. Beep is gone
 
Status
Not open for further replies.
Top