Cognomen
♦
Does anyone know how to get the NX-901 to program into the Amateur band? 111D just tells me the frequency is out of range.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
NX-901 out of band?
- Thread starter Cognomen
- Start date
- Status
mmckenna
I ♥ Ø
I don't have any 901's or 411's, but I've got a ton of 900s and 410's.
That would be something in the firmware. I've been to Kenwood training in Long Beach, and all the guys I talked to there were hams, so I'm betting someone has made it work, but I've never seen any leaked firmware that would allow it.
That would be something in the firmware. I've been to Kenwood training in Long Beach, and all the guys I talked to there were hams, so I'm betting someone has made it work, but I've never seen any leaked firmware that would allow it.
nothing in the real world right now for the 901. I have been trying for 10 years, the one guy who could have done it, is not with JVCK since the merger. I do know they guys out in Cali have been trying, but requires modifying the filters to get them to work in the 902 band.
the wait goes on.
the wait goes on.
On the 981 you programmed channel numbers, not frequencies! Did a bunch of them years ago. Would the 901 be the same?
mmckenna
I ♥ Ø
On the NX-901/NX-411, you can put in the frequency.
Cognomen
♦
Thanks everyone. Was hoping there might be an easy hex-edit method. Will continue to use my XTL-2500.
- Status
