NXDN TRS setup help?

[OHIOSCAN]

Been trying to get a local NXDN TRS setup but cannot get the voice following to work. The first 2 .bat
files launch and start following the system but the last 2 .bat voice following files are not working. My P25
TRS files run fine but I am missing something on the NXDN setup.

Any ideas?

Thanks


(1) FMP24.BAT
FMP24 -i1 -o20001 -_1 -b4 -wsl15.920 -f424.5625

(2) CC.BAT
DSDPlus -rc -i20001 -_1 -wsl940.1070 -wss100.200 -wel500.15 -wes425.900 -weh18 -wcl500.950 -wch21

(3) FMP24-VC.BAT
FMP24 -i2 -P71.0 -o20002 -rv -wsl245.920

(4) VC.BAT
DSDPlus -O NUL -rv -Pwav -i20002 -_1 -wsl940.1310 -wss100.200 -wel15.15 -wes425.900 -weh18 -wcl975.15



(FREQEUNCIES File)

NEXEDGE96, 197, 1, 1, 422.3375, 422.3375, 0
NEXEDGE96, 197, 1, 1, 422.6125, 422.6125, 0
NEXEDGE96, 197, 1, 1, 424.5625, 424.5625, 0
NEXEDGE96, 197, 1, 1, 424.7125, 424.7125, 0
NEXEDGE96, 197, 1, 1, 424.7625, 424.7625, 0
NEXEDGE96, 197, 1, 1, 424.9375, 424.9375, 0
NEXEDGE96, 197, 1, 1, 424.9625, 424.9625, 0

 

[slicerwizard]

You have all of the frequencies set as channel 1? They can't all be channel 1.

The channel numbers have to match the channel numbers that show up in the CC channel display.

 

[OHIOSCAN]

NEXEDGE96, 197, 1, 4, 422.3375, 422.3375, 0
NEXEDGE96, 197, 1, 26, 422.6125, 422.6125, 0
NEXEDGE96, 197, 1, 182 , 424.5625, 424.5625, 0

Ok these are the Ch # I have so this is how it should be?

Thanks

 

[slicerwizard]

If you've matched each frequency with its correct channel number, then yes.

If those aren't the correct pairings, then no...

 

[mtindor]

NEXEDGE96, 197, 1, 4, 422.3375, 422.3375, 0
NEXEDGE96, 197, 1, 26, 422.6125, 422.6125, 0
NEXEDGE96, 197, 1, 182 , 424.5625, 424.5625, 0

Ok these are the Ch # I have so this is how it should be?

Thanks

Ohioscan,

I thought the system was 191? Is it actually broadcasting L197 and not L191 ? If it is 197, then I need to make a change in the DB because I have it in there wrong. If it is 191, then you need to make a change.

DSDPlus.Networks
----------------------------
NEXEDGE96, 191, "Electrocomm UHF NEOH (NXDN)"

DSDPlus.Sites
----------------------
NEXEDGE96, 191, 1, "Parma"
NEXEDGE96, 191, 2, "Akron"

DSDPlus.Frequencies
--------------------------------
NEXEDGE96,191,1,4,422.3375,427.3375,4
NEXEDGE96,191,1,26,422.6125,427.6125,26
NEXEDGE96,191,1,182,424.5625,429.5625,182
NEXEDGE96,191,2,216,424.9875,429.9875,216

Of course, in the frequencies file I think the last number does not matter, so it looks like you are correct.

The only thing to check is to make sure it is truly Network ID 197 (as you have suggested) or Network ID 191 (as I have suggested). And if I'm wrong and it truly is network 197, please let me know so that I can fix the DB.

Mike

 

[OHIOSCAN]

Ohioscan,

I thought the system was 191? Is it actually broadcasting L197 and not L191 ? If it is 197, then I need to make a change in the DB because I have it in there wrong. If it is 191, then you need to make a change.

No just a typo it is Site 191

Mike