Tbendick, thank you very much for your help. I programmed in the custom tables. This is what I did if you could double check me.
Table 1: Lo channel: 380 Table 2: Lo channel: 560
Hi channel: 559 Hi channel: 759
Offset: 380 Offset: 560
Base: 482.000 Base: 483.000
Step: 12.5 Step: 12.5
I didn't know if the second offset frequency was suppose to be 560 or 570 so I guessed and used 560.
Also I programmed in all 23 frequencies in the system in no particular order.