Nyc doitt uhf

[coolrich55]

Any tricks or anything special I need to know about programming this system in a psr500 or is it pretty straight forward?

 

[tbendick]

Best way is to use the software and download from RR.
but its pretty simple just make sure you do the step offset and base.

 

[coolrich55]

Ok well maybe I don't have it programmed correctly. I didn't do the step offset and base. I don't really want to pay for the download. But I also don't understand the offset and base part. Could you steer me in the right direction?

 

[tbendick]

PSR-500/600 How to add Custom Table when entering a Motorola UHF trunking system - Powered By Kayako SupportSuite

 

[coolrich55]

Tbendick, thank you very much for your help. I programmed in the custom tables. This is what I did if you could double check me.
Table 1: Lo channel: 380 Table 2: Lo channel: 560
Hi channel: 559 Hi channel: 759
Offset: 380 Offset: 560
Base: 482.000 Base: 483.000
Step: 12.5 Step: 12.5

I didn't know if the second offset frequency was suppose to be 560 or 570 so I guessed and used 560.
Also I programmed in all 23 frequencies in the system in no particular order.

 

[coolrich55]

So I'm pretty sure I got the custom tables correct except for the second offset. It says it could be 560 or 570. I tried both but no luck with either. When I analyze the frequencies I'm picking up transmissions so I know I got something wrong. Any help?

 

[Richard]

My settings for the PSR600 which have worked successfully on this system are:

Lo 380
Hi Channel 65535
Offset 380
Base 482.0000
Step 6.250 (not 12.5Khz)

This should work for you.

Regards,
Rich

 

[coolrich55]

Thanks Richard, its working fine now. What I had wasn't even close lol.