Ocean Beach?

Status
Not open for further replies.

Jl942264

Member
Premium Subscriber
Joined
Sep 9, 2019
Messages
126
I was programming the Ole BCT15x with the Summer Zone I have and noticed some traffic coming over the Ocean Beach FD repeater split but not with the normal 88.5 PL tone. All I heard was MDC being transmitted and then the repeater hang time. The traffic had the exact same repeater split as the main channel just different PLs. I'm assuming this is a backup repeater, as I couldn't find any information regarding that posted on the database.... Anyone have any information? Same exact repeater split just different PLs
 

KC2zZe

Member
Joined
Aug 5, 2011
Messages
604
Location
Mid-Hudson Valley, NY
Quite a few, in fact...

Operations - 460.7500, 88.5
Operations 2 - 460.6000, 82.5
Fireground A - 465.5125, D432
Fireground B - 465.5375, D432
Islandwide - 476.4750, 77.0
Islandwide 6 - 453.7000, 94.8

OP: I'm confused by your use of the word "split." Are you trying to listen in on the repeater input frequencies?
 

Rudy3145

Member
Feed Provider
Joined
Nov 19, 2004
Messages
539
Location
New York
Islandwide-2 476.475 is a repeated freq used by all depts on fire island to talk to Firecom

OBFD Primary and Islandwide 6 are both repeated freqs. All others are simplex. Most of the action is on Islandwide 2.

Did you hear an MDC squelch of the morse code identifier?
 

Rudy3145

Member
Feed Provider
Joined
Nov 19, 2004
Messages
539
Location
New York
Islandwide-2 476.475 is a repeated freq used by all depts on fire island to talk to Firecom

OBFD Primary and Islandwide 6 are both repeated freqs. All others are simplex. Most of the action is on Islandwide 2.

Did you hear an MDC squelch of the morse code identifier?

Meant to say or the Morse code identifier.
 

Jl942264

Member
Premium Subscriber
Joined
Sep 9, 2019
Messages
126
Quite a few, in fact...

Operations - 460.7500, 88.5
Operations 2 - 460.6000, 82.5
Fireground A - 465.5125, D432
Fireground B - 465.5375, D432
Islandwide - 476.4750, 77.0
Islandwide 6 - 453.7000, 94.8

OP: I'm confused by your use of the word "split." Are you trying to listen in on the repeater input frequencies?
The audio I heard is coming over OPERATIONS 1 with a PL of 77.0. Not 88.5
 

Jl942264

Member
Premium Subscriber
Joined
Sep 9, 2019
Messages
126
Islandwide-2 476.475 is a repeated freq used by all depts on fire island to talk to Firecom

OBFD Primary and Islandwide 6 are both repeated freqs. All others are simplex. Most of the action is on Islandwide 2.

Did you hear an MDC squelch of the morse code identifier?
I just heard MDC1200 over OBFD1 460.7500 on a 77.0 pl tone then hear the repeater hang for 3 seconds then click off
 
Status
Not open for further replies.
Top