• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

ProScan: Official Software Thread

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
ProScan Version 1.7 Build 2 includes the RadioReference Imports feature, improved Scanner Over IP, and bug fixes.

Supported scanners are the BCD996T, BC796D, BC785D, BC780XLT, BC296D, and the BC250D.

I'm thriving to make this the best Computer Aided Scanning program and suggestions are very much appreciated.

http://www.proscan.org/index.htm

Bob
 

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
ka3jjz said:
Congrats Bob and good luck on the new release.

One suggestion for your web page; be sure to mention that a premium subscription to RR is required for the imports to work. The information can be pulled from our wiki, and the article can be linked to just like any other web page;

http://wiki.radioreference.com/index.php/Subscription

73s Mike
Ok. Oversight on my part as there was many things to do at release time.

Next version will include an UASD import/export feature for DMA and non DMA scanners that ProScan supports.

Bob
ProScan
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
21,994
Location
Bowie, Md.
FPO703 said:
Why not include the BCD396T as well since it's the same as the BCD996T?
No not quite. The 396 doesn't support multi site trunking, nor does it do any of the GPS based scanning features. However, I would bet that the 396 (and perhaps the BCT15) have several common functions in the firmware, and that should make it easier for Bob, to be sure.

The BCT15 doesn't do digital at all, and has less channel capacity. Interesting how the 3 are similar in some ways, not in others.

73s Mike
 

splash1

Member
Joined
Sep 7, 2005
Messages
415
Location
Eastern Iowa
Hey Bob
How about adding the bc898t . Pro scan looks great might have to switch from trunk star pro.

Rick
 

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
mike_s104 said:
I'm waiting on Build 3 to see how the naming of the recordings are. I think it's what's I'm looking for. :)
It should be what you're looking for. If not then let me know.
 

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
splash1 said:
Hey Bob
How about adding the bc898t . Pro scan looks great might have to switch from trunk star pro.

Rick
I'm going to be doing just DMA type scanners from now on.
 

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
splash1 said:
Hey Bob
How about adding the bc898t . Pro scan looks great might have to switch from trunk star pro.

Rick
I'm going to be doing just DMA type scanners from now on.

Sorry for the double post. i don't know how to delete this.
 
Last edited:

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
FYI - I'm in the process of changing my site to a new host and you may see it down until DNS servers get updated with the new host info.
 

somme1916

Member
Joined
Jul 8, 2007
Messages
61
ProScan said:
FYI - I'm in the process of changing my site to a new host and you may see it down until DNS servers get updated with the new host info.

Your site is working for me @ 1330hrs. Looks like a neat pgm.

I don't know if the newer GRE digital scanners are "DMA" or not so excuse this if they are not. If so do you plan to add support for them ?

Rob
 

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
somme1916 said:
Your site is working for me @ 1330hrs. Looks like a neat pgm.

I don't know if the newer GRE digital scanners are "DMA" or not so excuse this if they are not. If so do you plan to add support for them ?

Rob
No, I’m focusing exclusively on the Uniden products and will be adding the 15, 396, 246, and the 230 this year.
 

ProScan

Member
Premium Subscriber
Joined
Jul 2, 2006
Messages
3,503
Location
Ontario, Calif.
ProScan Version 1.7 Build 3 Is Out!

I've added several items, many are user requested.

Import UASD files (all types) to ProScan (DMA and non-DMA scanner types)
Multiple sound cards support (capture)
Recorder user selectable filenames format
Recorder option lookup record flag from database
Recorder no loss
Quick Key assignment shows quick keys in use (DMA scanners)
Caption ICON user selectable
ProScan Sessions Manager

ProScan supports the BCD996T, BC796D, BC785D, BC780XLT, BC296D, and the BC250D Scanners. ProScan is feature rich with the friendliest user interface.

www.proscan.org

Bob
 
Last edited:

mike_s104

Member
Premium Subscriber
Joined
Aug 25, 2004
Messages
4,677
Location
Berkeley Co. WV/ Loudoun Co. VA
ProScan said:
I've added several items, many are user requested.

Import UASD files (all types) to ProScan (DMA and non-DMA scanner types)
Multiple sound cards support (capture)
Recorder use

r selectable filenames format
Recorder option lookup record flag from database
Recorder no loss
Quick Key assignment shows quick keys in use (DMA scanners)
Caption ICON user selectable
ProScan Sessions Manager

ProScan supports the BCD996T, BC796D, BC785D, BC780XLT, BC296D, and the BC250D Scanners. ProScan is feature rich with the friendliest user interface.

www.proscan.org

Bob
Thanks Bob...

Build 3 names the files like I was looking for. (folders per each day would help organize, but I'm not complaining.) works beautifully!!
 
Top