freqscout
Member
- Joined
- Jan 21, 2006
- Messages
- 700
I am watching trunker and there has not been any activity on Channel 1 (866.5375) since I restarted Trunker on it around say 10:15 this morning. There is plenty of activity on the other three with some traffic on the secondary CC. Too bad truker doesn't show the denieds and ques in the activity frame. Accuracy level on the Trunker is 95.2%.
Any ideas or info folks?
Follow-up: After this post I tuned the scanner to Channel 1 and I hear the repeater randomly keying up with no audio (kinda like a kerchunk for all of you hams). There is still plenty of traffic so the repeater should be hopping.
More Follow-Up: Caught the Morse Code ID on Ch1...was for the site I am sure. I was able to decode part of it.
Any ideas or info folks?
Follow-up: After this post I tuned the scanner to Channel 1 and I hear the repeater randomly keying up with no audio (kinda like a kerchunk for all of you hams). There is still plenty of traffic so the repeater should be hopping.
More Follow-Up: Caught the Morse Code ID on Ch1...was for the site I am sure. I was able to decode part of it.
Last edited:
