• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Old school question C800-900

Status
Not open for further replies.
T

tech2461

Member
Joined
Jan 19, 2012
Messages
57
Location
Bradenton, Fl
Does anyone recall, on these control heads, when connected to a Mastr II, if you have the PSLM option, to make the head scan in a non priority mode where it doesn't tick back to the selected operating channel for activity? I can't find anything in the LBI's about this.
 
merlin

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,514
Location
DN32su
Master II can be configured with just about every control head earlier than the Orion series.
The heads are programmable, maybe look up programming reference manuals and SRNs
Dig up the matrices documents, that can tell you where to look.
 
K

kf8yk

Member
Joined
May 3, 2003
Messages
716
With a 4 or 8 channel PSLM module in the C800/C900 heads remove Q2402 to operate as non-priority scan.
 
merlin

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,514
Location
DN32su
Give me the model/part number of your control unit, I likely have documentation for it.
This document at least has options combinations listings by part number.
 

Attachments

  • lbi-30238 C-500 basicf.pdf
    1 MB · Views: 0
Status
Not open for further replies.

Similar threads

rjvalenta
is my radio bricked?
Replies
9
Views
1K
ramal121
ramal121
M
MCS2000 boot loop
Replies
5
Views
565
a417
A
N
BCD325P2/BCD996P2: Just got my Uniden BCD325P2 - quick question
Replies
15
Views
2K
bearcatrp
bearcatrp
sonm10
Unitrunker --> Trunking Recorder using VAC Distorted Audio
Replies
4
Views
727
Pape
P
fog
XG-100M - EDACS NAS?
Replies
8
Views
907
ecps92
ecps92
Top