• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Once again, the XTS3000 unmute problem

Status
Not open for further replies.

footage

Member
Premium Subscriber
Joined
Feb 20, 2004
Messages
42
I have a unit that seems correctly programmed for rx only / no affiliate on a Mot Type II SmartZone system. As many before me, I can't get the radio to unmute. I've read and followed suggestions in many other threads, including the "MDC unmute AND / receive unmute: std" and set the Rx Unmute delay to 1 ms.

Is there anyone in the San Francisco Bay Area fluent in Astro CPS who could take a look? Happy to cover the costs of someone's valuable time. Thanks.
 

Skypilot007

Member
Premium Subscriber
Joined
Dec 26, 2005
Messages
2,129
Location
Medford, NJ
MDC settings have absolutely nothing to go with trunking. There are numerous things that can cause the radio to not unmute on active talk groups. If you want some help with your code plug I'd be willing to have a look at it for you.
 
Status
Not open for further replies.
Top