DSDPlus One Radio with DSDPlus Fastlane

Status
Not open for further replies.

cpohlad

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
242
Location
Midlothian, VA
So, I've been trying to get the one radio setup option working with DSDPlus Fastlane.

I edited my batch file for FMP24-CC to the following:
FMP24 -rc -i1 -o20001 -a1 -P0.0 -b12.5 -f855.6625


Here is what FMP24 looks like:

1601941467381.png

I am not getting any decodes though when I run the 1R batch file:
DSDPlus -r1 -T -E -Pwav -i20001 >>1R-log.txt

1601941553724.png

1601941624500.png

When I turn monitor on, I can hear the control channel in the application.

Thoughts?

Unitrunker works fine and decodes without issue.
 

R0am3r

Salt Water Conch
Premium Subscriber
Joined
Apr 13, 2014
Messages
724
Location
Oneida County, NY
You can also control the gain by clicking on the FMP24 window and then use the g/G keys while it is running. Gain depends on the signal strength. I typically don't exceed 30.

What type of signal are you trying to decode?
 

cg

Member
Premium Subscriber
Joined
Dec 13, 2000
Messages
4,578
Location
Connecticut
I believe Unitrunker can trunktrack it with P25 decoding. Been a long time since I played with it though.

chris
 

radiotrack1

Member
Feed Provider
Joined
Apr 14, 2005
Messages
114
Location
Lumberton, NC
What is the -a switch for in your fmp24cc file. Couldn't find that in the documentation. I dont use an offset or bandwidth switch. If you do not enter them the system will use defaults. My command lines are

FMP24 -rc -i1 -o2001 -f853.7875

DSDPlus -r1 -T -E -f1 -i2001
 

radiotrack1

Member
Feed Provider
Joined
Apr 14, 2005
Messages
114
Location
Lumberton, NC
I couldn't edit my reply. Forgot to mention the -f1 in my 1r.bat is for P25 only. You should not have the -f1 for motorola smartzone
 
Status
Not open for further replies.
Top