Ongoing Changes: Marion Co. MECA System

Status
Not open for further replies.

kg9qm

Member
Joined
May 22, 2008
Messages
71
Reaction score
1
So, any ideas whose MECA radio has been stuck in xmit on the digital countywide channel for the past 24+ hours? Seems to be sitting in a kitchen, with dishes clanking, phones ringing, people yakking. I thought I heard a still-sleepy youngster say something to 'dad', as if they'd just rolled out of bed.
 

delallen

Member
Joined
Jul 30, 2005
Messages
78
Reaction score
0
Location
Greenwood, IN
Listening to it. Has to be sitting in a charger. Obviously no one is monitoring it from MECA.

Maybe we'll see what's for supper!
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Reaction score
109
Location
Virginia
By the sound of it I would say it is the MECA communications van with a VOX Headset mic stuck on I have heard road directions given out stuff about the flood and other operations on there it sounds like crap and I even get the Digital good.
 

KC9NEG

Member
Joined
Apr 22, 2004
Messages
745
Reaction score
75
Location
Indianapolis, IN USA
I got tired of it and killed my feed. It's back online now--I even heard a bit of activity a few minutes ago.

Todd/Indy
KC9NEG
 

KC9NEG

Member
Joined
Apr 22, 2004
Messages
745
Reaction score
75
Location
Indianapolis, IN USA
I pulled my feed down again. It's been broadcasting a whole lot of nothing and I want to play it safe with my ISP re: streaming. I'm monitoring and if interesting stuff starts happening, I'll put it back online.

Todd/Indy
KC9NEG
 

Dispatch2323

Member
Joined
Dec 27, 2007
Messages
444
Reaction score
55
The new meca system has been silent for the most part...does anyone know what's going on with the switch..are we still in a wait and see who budges first mode?
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Reaction score
109
Location
Virginia
The new meca system has been silent for the most part...does anyone know what's going on with the switch..are we still in a wait and see who budges first mode?


A wait and see game there are some Higher ups pushing on MECA to make some changes so we will have to just sit back and see what happens. No new cut over dates yet.
 

seanb580

Member
Joined
Nov 4, 2004
Messages
79
Reaction score
0
Location
Carmel, In
i'm programming my 996....do i need to program both sites or can i just program the public safety site? I'm only interested in fire / police.....no public service.
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Reaction score
109
Location
Virginia
i'm programming my 996....do i need to program both sites or can i just program the public safety site? I'm only interested in fire / police.....no public service.


Just program 262-101 SYS 1 Public Safety I would not get to into it they may not be using it.
 

seanb580

Member
Joined
Nov 4, 2004
Messages
79
Reaction score
0
Location
Carmel, In
yeah, i'm aware of all the problems. I just downloaded all the new firmware updates and thought I would go ahead and program the new system while I had everything out. Thanks for your help.
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Reaction score
109
Location
Virginia
yeah, i'm aware of all the problems. I just downloaded all the new firmware updates and thought I would go ahead and program the new system while I had everything out. Thanks for your help.

Let us know how it works for you with the new Firmware it works fine for me but I know some others it did not help them out. Plus dont forget the new adjustments are hidden you have to push the hold then turn the scanner on to unlock it.
 

GTO_04

Member
Joined
Mar 10, 2004
Messages
1,952
Reaction score
139
Location
Noblesville, IN
My 396 works better on the new MECA system than on SAFE-T, though it is better on SAFE-T after the update.

GTO_04
 

jerk

Active Member
Joined
Sep 5, 2003
Messages
2,448
Reaction score
3
Location
jerkville
My 396 works better on the new MECA system than on SAFE-T, though it is better on SAFE-T after the update.

GTO_04
MECA 101 & 102 do not sound to bad. They sound like typical Uniden digital decoding.
102 was decoding about 24 and I moved it about 8 inches and it went down to 0. This was at 465 and the airport area. I don't think I ever received above a ERR 30. That's pretty good, 0 is excellent.

I only had limited time to listen, but what I heard sounded good and I had good reception out of town all the way to Whiteland on I-65. I did shut off I-calls on system 102 though, too much talking, and boy those bus drivers drive like manics... heard them reporting accidents or injuries on their buses. And at the convention center, radios are still analog trunked. Did not carry the scanner because I was busy and for security reasons.
 

seanb580

Member
Joined
Nov 4, 2004
Messages
79
Reaction score
0
Location
Carmel, In
Let us know how it works for you with the new Firmware it works fine for me but I know some others it did not help them out. Plus dont forget the new adjustments are hidden you have to push the hold then turn the scanner on to unlock it.

I wasn't aware of that...thanks for that little tidbit of info! I will do that today when I get a chance.
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Reaction score
109
Location
Virginia
I wasn't aware of that...thanks for that little tidbit of info! I will do that today when I get a chance.


I also forgot to tell you the display will flash green orange then come on that is ok so dont freak out then in the menues there are some settings auto AGC most be on then push function then push the volume knob to get to the setting it should be listed on the website on how to do it if not PM and I can run you through it in better detail and better spelling in a hurry sorry.
Just a note here this is just a smalle part.
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Reaction score
109
Location
Virginia
More apps for MECA changes?
24YEAP780209663 METROPOLITAN EMERGENCY COMMUNICATIONS AGENCY 4159737 Coordination in Progress 6/12/2008 3:41:25 PM
24PWAP380209677 METROPOLITAN EMERGENCY COMMUNICATIONS AGENCY 4159737 Submitted To Coordinator 6/9/2008 10:15:28 AM
24PWAP380209677 METROPOLITAN EMERGENCY COMMUNICATIONS AGENCY 4159737 New 6/12/2008 9:14:33 AM
 

Ayrow

Member
Joined
Jan 11, 2003
Messages
32
Reaction score
0
Location
Indianapolis, IN
hello

Just wanted to say hello to everyone here.
Been using this website for years, but I think this is the first time I've ever really posted anything.
Some of you might be familiar with my website, PhotoTac.com

I found this particular thread of interest and look forward to getting to know some of you.

Stay Safe.
 
Status
Not open for further replies.
Top