sqlgeek
Member
I've tried all of the suggestions but I still cannot get the op25-liq.service to start automatically. I can start it manually after re-boot and it works fine and the stream starts. The service is loaded and enabled but it never goes active. The OP25-rx service is working fine...Otherwise I get this when checking the op25.liq systemctl status:
systemctl status op25-liq.service
● op25-liq.service - op25-liq
Loaded: loaded (/etc/systemd/system/op25-liq.service; enabled; vendor preset:
Active: inactive (dead) since Sun 2019-09-15 14:11:08 CDT; 11min ago
Process: 435 ExecStart=/usr/bin/liquidsoap LFD_Stream.liq (code=exited, status
Main PID: 435 (code=exited, status=0/SUCCESS)
Sep 15 14:11:04 raspberrypi systemd[1]: Started op25-liq.
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:08 >>> LOG START
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:06 [main:3] Liquid
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:06 [main:3] Using:
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:07 [gstreamer.load
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:07 [dynamic.loader
Sep 15 14:11:08 raspberrypi liquidsoap[435]: strange error flushing buffer ...
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:08 >>> LOG END
Sep 15 14:11:08 raspberrypi systemd[1]: op25-liq.service: Succeeded.
lines 1-15/15 (END)...skipping...
● op25-liq.service - op25-liq
Loaded: loaded (/etc/systemd/system/op25-liq.service; enabled; vendor preset: enabled)
Active: inactive (dead) since Sun 2019-09-15 14:11:08 CDT; 11min ago
Process: 435 ExecStart=/usr/bin/liquidsoap LFD_Stream.liq (code=exited, status=0/SUCCESS)
Main PID: 435 (code=exited, status=0/SUCCESS)
Sep 15 14:11:04 raspberrypi systemd[1]: Started op25-liq.
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:08 >>> LOG START
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:06 [main:3] Liquidsoap 1.3.3
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:06 [main:3] Using: bytes=[distributed with OCaml 4.02 or above] pcre=7.2.3 dtools=0.4.0 duppy=0.7.2 duppy.syntax=0.7.2 cry=
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:07 [gstreamer.loader:3] Loaded GStreamer 1.14.4 0
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:07 [dynamic.loader:3] Could not find dynamic module for fdkaac encoder.
Sep 15 14:11:08 raspberrypi liquidsoap[435]: strange error flushing buffer ...
Sep 15 14:11:08 raspberrypi liquidsoap[435]: 2019/09/15 14:11:08 >>> LOG END
Sep 15 14:11:08 raspberrypi systemd[1]: op25-liq.service: Succeeded.
Can you post what you get running the same command after startup but before you manually run the .liq? Trying to see what errors it is giving you.