How do I program p25 phase 2 radio system into a uniden bcd996p2 scanner manually? I use freescan but I just want to learn how to do it manually. Please email me a map how to Thank You For Your Attn. onegrave@yahoo.com
p25 phase 2 radio system into a uniden bcd996p2 scanner
- Thread starter onegrave
- Start date
You can copy it below and email it to yourself. There is an Easier to Read manual at:
Menu
Program System
ENTER
New System
ENTER
Select Sys Type
P25
ENTER
Standard Trunk
ENTER
Confirm?
ENTER
It will show the system number rather than a name, doesn't matter for now
Edit Site
ENTER
New Site
ENTER
Set Quick Key
ENTER
Scroll to 99 (I use this for test system as it is quick to recall)
ENTER
Scroll to "Set Frequencies"
ENTER
New Frequency
ENTER
xxx.xxxxx [type control channel frequency here]
ENTER
Hit Scan
If you want more frequencies, repeat the Set Frequencies part
chris
Menu
Program System
ENTER
New System
ENTER
Select Sys Type
P25
ENTER
Standard Trunk
ENTER
Confirm?
ENTER
It will show the system number rather than a name, doesn't matter for now
Edit Site
ENTER
New Site
ENTER
Set Quick Key
ENTER
Scroll to 99 (I use this for test system as it is quick to recall)
ENTER
Scroll to "Set Frequencies"
ENTER
New Frequency
ENTER
xxx.xxxxx [type control channel frequency here]
ENTER
Hit Scan
If you want more frequencies, repeat the Set Frequencies part
chris
Thank You So MuchYou can copy it below and email it to yourself. There is an Easier to Read manual at:
Menu
Program System
ENTER
New System
ENTER
Select Sys Type
P25
ENTER
Standard Trunk
ENTER
Confirm?
ENTER
It will show the system number rather than a name, doesn't matter for now
Edit Site
ENTER
New Site
ENTER
Set Quick Key
ENTER
Scroll to 99 (I use this for test system as it is quick to recall)
ENTER
Scroll to "Set Frequencies"
ENTER
New Frequency
ENTER
xxx.xxxxx [type control channel frequency here]
ENTER
Hit Scan
If you want more frequencies, repeat the Set Frequencies part
chris
its so much easier and a lot faster with a software program like proscan and you can download it directly into your scanner in seconds rather than pushing buttons for an hour and making a mistake and need to start over..
I can do that sequence in less than two minutes. I use it when I am out chasing radio signals, get a new system and want it in the scanner. If I want talkgroup names, all the frequencies and different Quick Keys, I download the radio to ProScan later, fill in the remainder of the information and upload to the radio.
Besides, I was answering the original question about doing it manually.
chris
Besides, I was answering the original question about doing it manually.
chris