• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

P25 Trunking Talkgroups wont un-mute!

Status
Not open for further replies.
radioref2010

radioref2010

Member
Premium Subscriber
Joined
Oct 6, 2010
Messages
3
I have an XTS5000 that I am trying to properly program onto our P25 Trunking System. Before anyone asks, yes I am an authorised user of the system and have the system key provided. I have the entire systems frequencies programmed correctly into the XTS5000 however, when a TG is selected on the radio, the radio will not un-mute.

Are TGs entered using decimal or hex? I have them entered as hex and it wont work. Any ideas guys?

What may be preventing it from un-muting? The radio trunks the system correctly, i.e. the radio displays the RSSI and Site ID's and affiliates without problem, just wont un-mute!

Any help would be greatly appreciated.
 
radioref2010

radioref2010

Member
Premium Subscriber
Joined
Oct 6, 2010
Messages
3
Where is that exactly? Which part of the CPS? I thought I had everything like that selected.
 
Status
Not open for further replies.

Similar threads

NCFireman11
SDS100/SDS200: SDS 100 having trouble with P25 simulcast
Replies
12
Views
976
a417
A
Z
BEST P25 PHASE 2 ALL BAND RADIO
Replies
4
Views
1K
jeepsandradios
jeepsandradios
N
Exxon Mobil Baton Rouge 800MHz Type ii Trunking System Talkgroups and Connect Tone
Replies
4
Views
716
Nojo6
N
lgcooper
BCD325P2/BCD996P2: BCD325P2 Programming 5 decimal (50 KHz) control channels
Replies
12
Views
1K
wtp
W
P
Massachusetts State Police P25
Replies
3
Views
870
ecps92
ecps92
Top