• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Pager Tones-Not working

Status
Not open for further replies.

MIRS332

Deactivated
Banned
Joined
Apr 14, 2012
Messages
1
Any ideas: XTS-2500 pager tones do not work on radio? Have it set for A-B/A-C/C-D. No logical explanation. Can anyone help me step by step with setting up the quick call system. Need to use the radio for the fire department as a pager. Duty, Night and General
 
Joined
Jun 5, 2004
Messages
208
Location
Arizona
what firmware is in the radio? have you set the tones to a personality? are you sure they are the correct tones? are they in the right spot to decode them or to transmit them? You have not provided enough information about your set up to be able to help you.
 

jason51

Member
Joined
Dec 19, 2002
Messages
144
Location
Dallas
I have the same problem yes, it is set to personality, correct tones, new radio, just shipped.
 
Status
Not open for further replies.
Top