• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Partial Serial/Com Port Failure...?

Status
Not open for further replies.

BlueDevil

Member
Feed Provider
Joined
May 5, 2010
Messages
770
Location
WA
I believe I may be experiencing a partial failure of my com/serial port.

Here is the situation. I am using several pieces of Motorola Programming Software. I am able to use my serial port to read/write radios using some of the programing. However when I am trying to program other radios using a different cable and different software I am not able to program the radio. By using a different computer running the same OS and Motorola Software I am able to program the radios fine. I basically have isolated it down to an issue with the serial port. Has anyone ever had any similar issues?
 

CommJunkie

Member
Joined
Feb 22, 2008
Messages
914
Location
FM19gt
Is it a genuine serial port? What OS are you running? What radios won't work when you try to program them?
 

BlueDevil

Member
Feed Provider
Joined
May 5, 2010
Messages
770
Location
WA
It is a genuine serial port. I can program my XTS2500 via serial port. I cannot program my M1225 or CP200. I am running XP SP3.
 

cmdrwill

Member
Joined
Mar 30, 2005
Messages
3,984
Location
So Cali
Shut down Windows and your computer, then try the M1225 from a 'cold' start.
Windows does not always release the com ports.
 
Status
Not open for further replies.
Top