• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

PC76xl Uniden. Need some help or info please.

Groundhog1960

Member
Joined
Sep 20, 2019
Messages
13
Hello everyone. I have a Older Uniden PC76xl, Philippine made and it is hooked up to my 102" ss whip. 1:01 swr on channel 1 and 1:2 on channel 40 so, no swr problem. Using lmr-240uf coax cable around 15 ft.
The problem I am having is when I key up and talk on say channel 1 or 2, and up through the channel 11 and 12 freqs, the needle actually swings backwards when modulating.
When talking say from 12-13 on up to channel 40 then the needle swings forward.
It's like it's not modulating correctly on the lower 11 meter band but, is on the upper end of the band.
It seems to talk well but the backward modulation on the lower channels has me puzzled.
Anyone know what might be causing this?
 
Last edited:
Top