• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

PD7 Series + Wireshark

Sputnik1

Sputnik1

Member
Joined
Jun 16, 2009
Messages
45
Location
Kettering - Northants - UK
Hello All

For many years I have used Wireshark to see data being read / written to M'rola radios when programming but
whenever I connect Hytera radios I cannot even ' see ' the connection .......

any ideas / suggestions gratefully accepted

stay safe all

rgds

Sputnik
 
0

0xFF1E071F

Member
Joined
Sep 26, 2019
Messages
50
If I don't remember wrong, Motorola creates a local network between device and windows, thus you can sniff the traffic with wireshark. On the other hand Hytera uses USB protocol. You should install USBPcap and sniff the USB traffic. BTW, there are options which Hytera uses a local network between windows and device but, programming with CPS is not one of them.
 
You must log in or register to reply here.

Similar threads

E
GP series R03.16.00 problem.
Replies
4
Views
378
a417
A
W
Budget GMRS Mobile and HT Setup (Seeking Advice!)
Replies
13
Views
952
rf_patriot200
R
U
DMR vs P25 - Encryption standards and software vs hardware encryption
Replies
4
Views
1K
N4DES
N4DES
E
DSDPlus Spurious network when trunking
Replies
7
Views
1K
EI9BAB
E
Fed_Interopman
APX8500 Mobile Codeplug Cloning - WiFi Passcode Issue
Replies
1
Views
683
jeepsandradios
jeepsandradios
Top