• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

PD982 Bluetooth not in manual

dazey77

Member
Joined
Jan 30, 2015
Messages
93
This is the best I found.
https://www.hamdigitaal.nl/download...MR-Conventional-Radio_BT_User-Manual_R8.5.pdf
for firmware 8 but principles apply to 9.

I finally got bluetooth programming to work but it was a major PITA. You have to use Bluesolei software and a seperate bluetooth dongle. The bluesolei software doesn't install properly so it took me about 10 attempts to get it to install (and after doing it once, it still took me 10 times to get it to install on a second machine). Bluesolei also screws up the in built bluetooth so isn't usable on my production machine. . .

My experience of bluetooth pairing for headsets etc. has been hit and miss.

I guess they don't put it in the manual in the hope that no-one will use it!
 
Top