-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Phase II question
- Thread starter Will001
- Start date
- Status
MSS-Dave
Member
Phase 1 won't decode anything Phase 2. Completely different digital protocol.
interesting as my 396t will at least say DAT or LNK on the P2 system for the PA statewide system.
slicerwizard
Member
That's on the control channel? Not surprising, since P1/P2 CCs are the same.
jparks29
John McClane
Depends on HOST(F/W) version.
1 of 3 things..
Absolutely nothing, it will ignore the channel grant.
It will grant channel, not unmute, then go back to the control channel.
Beep (VCO UNLOCK) as it's commanded to go to a freq, it doesn't support.
The newest firmware ignores Phase II channel grants on mixed mode systems.
radioman2001
Member
- Joined
- Mar 6, 2008
- Messages
- 2,974
- Reaction score
- 198
My XTL-5000 follows the channel grant, selects the channel and displays it, then stays for the entire transmission, but no audio.
Quote"
Beep (VCO UNLOCK) as it's commanded to go to a freq, it doesn't support.
Maybe on Other Band Trunking systems if the Channel ID doesn't contain the granted frequency. On the 700/800 band being set in stone that shouldn't happen.
Quote"
Beep (VCO UNLOCK) as it's commanded to go to a freq, it doesn't support.
Maybe on Other Band Trunking systems if the Channel ID doesn't contain the granted frequency. On the 700/800 band being set in stone that shouldn't happen.
- Status
