-
Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.
We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.
If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html
Plymouth Police
- Thread starter marcp90
- Start date
- Status
AEofficer116
Member
well, first of all they are on the WESTERN WAYNE SYSTEM not the northville tower and i dont think they switched yet, but they are on a digtal 800 freq. 866.650....
They were on the MPSCS for a few days or so, but have since gone back to 866.650....They'll be back.marcp90 said:
SEMTTP
Member
I am afraid that this is a *little* incorrect.AEofficer116 said:
Plymouth does have a talkgroup on the western wayne system but they do not use it. Plymouth did switch to the MPSCS, but I believe they were having some radio console issues that forced them back to their old frequency.
Plymouth and Canton both have talkgroups on the WWS but they are not in use.
AEofficer116
Member
thats what i said they are on the WW System, but are using 866.650 right now
SEMTTP
Member
NO!! Plymouth is not on the WW system, they only have a talkgroup there but it is never ever used!!!! They are actually on the MPSCS system, but do to some minor problems with the consoles they are back on 866.650 which is a STAND ALONE frequency, it belongs to Plymouth and to nobody else!!!!AEofficer116 said:
AEofficer116
Member
Yeah Yeah Yeah... Thats What I Was Trying To Say !!!!!!!!!!!!!!!
bsrepellant
Member
- Joined
- Mar 22, 2006
- Messages
- 22
Original Qustion in thread
I couldn't find any info on the 1 digital freq Plymouth has. Is it P25?
Would that be the CC? I don't see any TG listed for MPSCS either.
Just curious. Is there much activity? I am close to Plymouth so I would be interested in trying to receive.
I couldn't find any info on the 1 digital freq Plymouth has. Is it P25?
Would that be the CC? I don't see any TG listed for MPSCS either.
Just curious. Is there much activity? I am close to Plymouth so I would be interested in trying to receive.
Plymouth Twp Is On 866.6500 Digtal Channel, Not Mpscs They Have A T/g On Western Wayne System But Its Not Used Yet That I Know Of...... No Control Channel Just Use 866.650.........
SEMTTP
Member
They are on the MPSCS system too, but they are just having a few issues that made them go back to their standalone frequency. Yes 866.650 is P25 Digital. While they do have a talkgroup on the WW system, Canton Township does too, but neither of them have ever been used, and they wont be because they are not part of the system, nor are they going to switch to the WW system. WW is ONLY Dearborn Heights, Garden City, Inkster, Wayne and Westland. There are NO OTHER USERS police and fire wise on this system.FNNM376 said:
Hopefully that pretty much explain's it. Plymouth Police(township and City) do not use that system, they use there own single frequncy and the MPSCS, and they will be back to the MPSCS full time here real soon.
did not know that, i though they were switching to the ww group but i now see there MPSCS talkgroups area listed under wayne co..... thanks
Last edited:
bsrepellant
Member
- Joined
- Mar 22, 2006
- Messages
- 22
I now see Plymouth listed on MPSCS. I did not see them before I posted.
Also did not see anything listed for 866.650. I may have over looked...
Now I have a different question. How do you program 1 digital freq in a 396?
I created a new system P25 with the 1 freq. (866.650) with no group information.
As yet, I haven't got any hits. Any suggestions? I can hear the digital in conventional mode. From Western Livonia. Too far away?
Also did not see anything listed for 866.650. I may have over looked...
Now I have a different question. How do you program 1 digital freq in a 396?
I created a new system P25 with the 1 freq. (866.650) with no group information.
As yet, I haven't got any hits. Any suggestions? I can hear the digital in conventional mode. From Western Livonia. Too far away?
SEMTTP
Member
Just program 866.650 into your scanner, make sure that it is set to a Motorola system and you will be happening.....now this might work for you but I can never get them to pop up when I am in scan mode ie scanning Flat Rock, Northville and Ann Arbor.....but it is definatly a motorola system but it is not trunked.bsrepellant said:
Combustion
Member
I don't know how the other Unidens are, but the 296D automatically decodes the P25 non-trunked transmissions. Mine is set to 866.65 with NFM as the Mode and it works fine when I am in range of Plymouth.
SEMTTP
Member
I have always programmed it in as an MO system, if I program it in FM mode it does not receive the digital side.
SEMTTP
Member
Yes it is still analog, it is 155.565....There is talks about them going digital too, but that remains to be seen if they are definatly switching
- Status