PPS Beta04 seems to not accept multiple conventional frequencies in receiving mode

[jpolich7]

PPS Beta04 is accepting trunking talk groups into lists, but seems to not be accepting conventional frequencies into multi-frequency lists.

At D-3 Protocol List Setting there is no conventional analog choice without having to pick a tone protocol. The instructions at this point say no selection is necessary for CSQ frequencies::

Protocol Type

• Definition
  Selects the protocol type for the setting item.
• Range
  You don't need to set any protocol setting if you are only using CSQ channel (carrier squelch)

At D-5 Zone and Channel Setting, there is no "conventional" mode in the Receiving Mode drop down menu. You get an error message if you do not chose a protocol-- but there is no conventiional CSQ protocol to select. You can select only a single analog conventional frequency from profiles, rather than add or delete several frequencies from frequencies entered at D-2 Conventional Frequency list.

Any suggestions?

 

[Webodisk]

Have you set a knob position for each conventional frequency you want to scan ?

 

[jpolich7]

Have you set a know position for each conventional frequency you want to scan ?

Trying to place several VHF fireground tac frequencies to scan at a single knob position.

 

[Webodisk]

Create a Zone with each frequency you wish to scan at a separate knob position in the monitor mode, Then make a knob postion set for normal scan all of the zone/knob positions will appear on the left