paramedszaf
Member
Everyone here has some great pics of their equipment, and great equipment in general. Here is pics of what I have so far. I am looking for tips and suggestions to get this up to par with everyone else. Here is a run down of what I have in service as well as at my disposal:
1 – HP a6300f Desktop computer (underneath corner of counter)
2 – Dell 20” Ultraview monitors (utilizing Ultramon software)
1 – Microsoft wireless keyboard and mouse.
1- Radio Shack Pro-2051 desktop scanner (up for sale if anyone interested)
1 – Uniden BCT-7
1 – Radio Shack Pro-2018 Desktop Scanner
1 – Uniden SC150C Scanner
1 – Motorola HT-1250 VHF Portable
1 – Motorola HT-1550 VHF Portable
1 – Dell m1210 XPS Laptop
The above is what I have in service. The following I have at my disposal:
2 - Motorola M-1225 VHF mobile radios
1 - 13.7 VAC power supply
1 - Radio Termination Panel for CDM series radios (need to find the adapter for the accessory port on radio)
3 - Remote radio consoles (see pic)
1 – eMachine desktop computer (will get specs) w/ 15” LCD monitor, wireless keyboard/mouse, speakers and wireless internet capable.
1 – Motorola speaker (accessory port connection)
I KNOW I need to complete the following:
- Run Cat 5e from basement to 2nd floor where the war room is to get off the wireless. I think there is a benefit to this unless someone can tell me otherwise.
- Run telephone line from basement to 2nd floor
- Find and find adequate antenna(s) depending on advise YOU guys/gals give me.
- Run antenna coax (or equivalent)
- Find multiplexer that I can afford.
- Figure out where/how to mount everything OR come up with a console I can build that looks descent but yet I have some desk space left.
-
Debating on the following:
- Purchase dedicated antenna for the mobile radios and have then set up to transmit if necessary.
- Utilizing the older eMachine computer for an online scanner for my area
- Making sure my power availability in that room is adequate
- Upgrading scanners
- Getting high power (100w or >) radios for the room.
Looking for tips/hints/suggestions here folks.. Let me have it! Thanks for your help in advance…
1 – HP a6300f Desktop computer (underneath corner of counter)
2 – Dell 20” Ultraview monitors (utilizing Ultramon software)
1 – Microsoft wireless keyboard and mouse.
1- Radio Shack Pro-2051 desktop scanner (up for sale if anyone interested)
1 – Uniden BCT-7
1 – Radio Shack Pro-2018 Desktop Scanner
1 – Uniden SC150C Scanner
1 – Motorola HT-1250 VHF Portable
1 – Motorola HT-1550 VHF Portable
1 – Dell m1210 XPS Laptop
The above is what I have in service. The following I have at my disposal:
2 - Motorola M-1225 VHF mobile radios
1 - 13.7 VAC power supply
1 - Radio Termination Panel for CDM series radios (need to find the adapter for the accessory port on radio)
3 - Remote radio consoles (see pic)
1 – eMachine desktop computer (will get specs) w/ 15” LCD monitor, wireless keyboard/mouse, speakers and wireless internet capable.
1 – Motorola speaker (accessory port connection)
I KNOW I need to complete the following:
- Run Cat 5e from basement to 2nd floor where the war room is to get off the wireless. I think there is a benefit to this unless someone can tell me otherwise.
- Run telephone line from basement to 2nd floor
- Find and find adequate antenna(s) depending on advise YOU guys/gals give me.
- Run antenna coax (or equivalent)
- Find multiplexer that I can afford.
- Figure out where/how to mount everything OR come up with a console I can build that looks descent but yet I have some desk space left.
-
Debating on the following:
- Purchase dedicated antenna for the mobile radios and have then set up to transmit if necessary.
- Utilizing the older eMachine computer for an online scanner for my area
- Making sure my power availability in that room is adequate
- Upgrading scanners
- Getting high power (100w or >) radios for the room.
Looking for tips/hints/suggestions here folks.. Let me have it! Thanks for your help in advance…