• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

preamp do they work ?

Status
Not open for further replies.

usnasa

Member
Joined
Apr 3, 2006
Messages
481
Location
Brooklyn NY
hello all
does anyone use or know about a preamp i am getting some freq very low and weak in the 400 and 800 freq range but the one i was looking into does the whole band from 2-1000 MHz http://www.hamtronics.com/
but it says not recommended for applications in a high rf environment where selectivity is essential to avoid overload or intermod interference.
i live in brooklyn ny i just added a 10 foot rg8 piece to my setup when i noticed the problem with static or low freq's
can i use this and does it work

thanks
 

scannerfreak

Moderator
Database Admin
Joined
Jul 3, 2003
Messages
5,185
Location
Indiana
What was wrong with your first thread? Closing this one, please use your exisitng thread.Thanks! :)
 
Status
Not open for further replies.
Top