Visit Prince Edward Island's Public Safety Scanning Site - Hear The News As It Happens! To Listen Live To P.E.I's Finest At Their Best. Covers Most Of Western P.E.I's Fire & RCMP. Visit The Site For More Info!
Last edited:
Visit Prince Edward Island's Public Safety Scanning Site - Hear The News As It Happens! To Listen Live To P.E.I's Finest At Their Best. Covers Most Of Western P.E.I's Fire & RCMP. Visit The Site For More Info!
It would be fine as long as they are able to get permission to have the feed online.
(2) Except as prescribed, no person shall intercept and make use of, or intercept and divulge, any radiocommunication, except as permitted by the originator of the communication or the person intended by the originator of the communication to receive it.
So in other words, i'm fine as long as i dont get caught.. but if i do, take it down immediately?
Does anyone know if there is a way to listen to the island Department Of Transportation, like the snow plows.. ect.. Cant find any frequencies anywhere.. so just thought i'd ask..
thanks
I dont have a trunking scanner, but the scanner i'm getting is able to pick up the 800mhz. If i program in the 5 local voice channels and 1 control channel, will i still be able to listen to the trunk system?
I know it would be hard to follow a certain conversation, but could it be done and would it work?
Yes it will work. There are 9 Island wide voice channels per site. just program in the set for the site you receive the best. You dont want to program in the control channel, it is just constant data. When the system is busy it will be hard to follow, courier companies, oil delivery, construction companies, lots of farmers, school buses etc.... so it might be hard to figure out who you are listening to and hard to follow a specific conversation.
I am familiar with that page, I provided Bill with a lot of that info. The local site channels are just repeated at that one site, much the same as a conventional repeater. The original plan would have been to assign a user to their local site. For example if a farmer in Souris never left the Souris area why repeat his radio traffic on every tower all the way to Tignish. The Dept of transport used to have many talk groups , one or more for each site. It just became confusing to have to keep changing "channels" as they went in and out of range so eventually they just programmed them as island wide and then the user never had to worry about where they were, the talkgroup worked everywhere. There are very few users left still on single site, mainly farmers, a few on Pisquid, Caledonia and few west. I havent heard any single site users on GlenValley in many years. The norm now is program a user as island wide.PRINCE EDWARD ISLAND Provincial Integrated Communication System
What are the Local/Site Trunking channels for?
Also, on that website, the talk group ID's chart, where it shows what you can listen to, will i pick up all of them on that list, or only some of them?
I am familiar with that page, I provided Bill with a lot of that info. The local site channels are just repeated at that one site, much the same as a conventional repeater. The original plan would have been to assign a user to their local site. For example if a farmer in Souris never left the Souris area why repeat his radio traffic on every tower all the way to Tignish. The Dept of transport used to have many talk groups , one or more for each site. It just became confusing to have to keep changing "channels" as they went in and out of range so eventually they just programmed them as island wide and then the user never had to worry about where they were, the talkgroup worked everywhere. There are very few users left still on single site, mainly farmers, a few on Pisquid, Caledonia and few west. I havent heard any single site users on GlenValley in many years. The norm now is program a user as island wide.
That list is Island wide users so yes you will get them all. There are several in that list that are no longer users on the system , charlottetown and DFO have system to vhf systems.
Also i'm concidering maknig a new account with RadioReference and my username will be ScanPEI. Just thought I'd let everyone know in advance. Thanks