Pro-106 NAC Coding

[Tramagod]

I just got a new Pro-106 today and have been going through the manual. I've been able to successfully program in two of my local systems. I now want to try to program some P25 freq's with the nac codes, but I can't find any direction on how that's done.I've read the manual from cover to cover and all I have found was a brief explanation of what nac coding was, but not how to program the codes themselves. Thanks in advance to anyone who might know how this is done.

 

[krokus]

Wirelessly posted (BlackBerry8530/5.0.0.973 Profile/MIDP-2.1 Configuration/CLDC-1.1 VendorID/105)

Are you programming by hand, or with software?

 

[Tramagod]

By hand, if I had a program it wouldn't be a problem.

 

[ka3jjz]

The Easier to Read guide has this information...

Easier to Read Pro-106/197/PSR500/600 Digital Scanner Manual

best regards..Mike

 

[RoninJoliet]

If you program by hand, choose a SList, program in the freqy then scroll down the menu, when you get to the PL/DCS set it to P25 and then when its active the NAC will be seen , then press "stor"....

 

[Tramagod]

Thanks to the both of you,that's been most helpful.