Pro-107 Firmware Issue

Status
Not open for further replies.

ME343

ME/NH/VT DB Admin
Database Admin
Joined
Jul 17, 2007
Messages
422
Location
Ellsworth, ME
Recently I tried updating the firmware and the USB cord wasn't detected so now my scanner shows: up Boot Ver:RF1.1 and up App Ver: NONE. I am thinking that I need to find the driver for the USB cord.
 
Joined
Nov 9, 2006
Messages
1,852
Location
Macomb, Michigan
Recently I tried updating the firmware and the USB cord wasn't detected so now my scanner shows: up Boot Ver:RF1.1 and up App Ver: NONE. I am thinking that I need to find the driver for the USB cord.
I'm not positive but I'm sure you already know how to do this. I believe you have to go to the device manager and to find the port that it may be using if possible. This is just a wild guess though.
 

ME343

ME/NH/VT DB Admin
Database Admin
Joined
Jul 17, 2007
Messages
422
Location
Ellsworth, ME
I'm not positive but I'm sure you already know how to do this. I believe you have to go to the device manager and to find the port that it may be using if possible. This is just a wild guess though.
I do that and it comes up as a unknown device
 

ME343

ME/NH/VT DB Admin
Database Admin
Joined
Jul 17, 2007
Messages
422
Location
Ellsworth, ME
I should add that I had to get a new USB cord to and its not like the one you get when you first get the scanner
 

ME343

ME/NH/VT DB Admin
Database Admin
Joined
Jul 17, 2007
Messages
422
Location
Ellsworth, ME
Not to be a smart#@$ or anything, but what you did to fix yours' may be what's needed by some one else here.
I'm one of those who needs to know the fix sir.
A friend let me borrow the data cable they had for there Pro-107
 
Status
Not open for further replies.
Top