pro-197 hung on control channel

Status
Not open for further replies.

KA1LCR

Newbie
Premium Subscriber
Joined
Mar 18, 2011
Messages
3
Location
Monroe, NH
My pro-197 is not resuming scan whan scanning a Motorola p25 trunking system (Maine state communication network) if the audio is coming from the active control channel. Is there a setting that I am missing? The scanner doesn't seem to be smart enough to know voice stopped and stays hung
on the control data stream carrier.
 

ScannerSK

Member
Joined
Mar 6, 2005
Messages
1,185
Location
Gilcrest, CO
My pro-197 is not resuming scan whan scanning a Motorola p25 trunking system (Maine state communication network) if the audio is coming from the active control channel. Is there a setting that I am missing? The scanner doesn't seem to be smart enough to know voice stopped and stays hung
on the control data stream carrier.
Was it working fine before and just stopped working properly? Is there a talkgroup ID displayed on the screen while this is occurring?

Shawn
 

ScannerSK

Member
Joined
Mar 6, 2005
Messages
1,185
Location
Gilcrest, CO
It appears there are a number of settings that affect P25 systems in the advanced menu (accessed by pressing PGM then FUNC then F3). I would attempt to set each of the following settings to the default by pressing F3 (Dflt).

DG Int Prime
96CC HD2 TO
96VC SQ TO
96VC XF TO
HD2 Qual DG

I'm thinking it could be one of the above settings that could be causing your issue.

Shawn
 

KA1LCR

Newbie
Premium Subscriber
Joined
Mar 18, 2011
Messages
3
Location
Monroe, NH
There is a talk group displayed, and it still receives that talk group. I am going to see f default helps. Thanks
 

buddrousa

Member
Premium Subscriber
Joined
Jan 5, 2003
Messages
8,773
Location
NW Tenn
Sounds like this programmed as a conventional channel and not a trunking system.
 
Status
Not open for further replies.
Top