• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

pro 2055 program talk groups

Status
Not open for further replies.

usnasa

Member
Joined
Apr 3, 2006
Messages
481
Location
Brooklyn NY
hello all does anyone know how to program the trunk freq and talk groups for the pro 2055 radio i have the control channels for port auth but how to i program the talk groups book is not that clear can anyone help me thanks
 

KCChiefs9690

CQ DX
Joined
Mar 20, 2004
Messages
1,786
Location
Lewis Center, OH
If you are doing it by the keypad (not using the computer), go to the bank that you want to program the talkgroups for, make sure you are in Manual mode, and press FUNC + TRUNK.

Then, you can enter the talkgroup by using the keypad.

Hope This Helps, :)
 

usnasa

Member
Joined
Apr 3, 2006
Messages
481
Location
Brooklyn NY
thats sounds good but i have stuff programed into my scanner now that i dont want to lose can i just put the trunking freq in my scanner it does nt ask me what channel to put it in i would like to put it at channel 225 because i have freq that i have from channels 1- 224 that i dont wanna lose can i put it at the end of my scanner ?
 

usnasa

Member
Joined
Apr 3, 2006
Messages
481
Location
Brooklyn NY
ok KCChiefs9690 i did what you said but when i program my talk group 00.080 then push enter it changes to

ed: 0064
id# 0064

is that right ??
 

Grog

Completely Banned for the Greater Good
Banned
Joined
Dec 19, 2002
Messages
2,959
Location
West of Charlotte NC
The 2055 does not support I-calls and niether do any of the GRE scanners. That's one advantage uniden has.
 

maalox

Member
Joined
Jan 21, 2006
Messages
755
Location
n y c
Grog said:
The 2055 does not support I-calls and niether do any of the GRE scanners. That's one advantage uniden has.
thanks grog. i did not no that. i will stick with uniden for now.
 

jeffrey420

Member
Joined
May 30, 2006
Messages
357
usnasa said:
thats sounds good but i have stuff programed into my scanner now that i dont want to lose can i just put the trunking freq in my scanner it does nt ask me what channel to put it in i would like to put it at channel 225 because i have freq that i have from channels 1- 224 that i dont wanna lose can i put it at the end of my scanner ?

Put the scanner in manual mode. Enter the channel location that you want the frequency in and press program. Now enter your frequency and press enter.
 
Last edited:

usnasa

Member
Joined
Apr 3, 2006
Messages
481
Location
Brooklyn NY
like i was saying i put in my control channels for port anth now i want to program my talokgroups so i am in Manual mode, and press FUNC + TRUNK.

Then, i entered the talkgroup by using the keypad.talk group 00.080 then push enter it changes to

ed: 0064
id# 0064

is that right ??
 

jeffrey420

Member
Joined
May 30, 2006
Messages
357
Use the numbers under the DEC heading with two zeros in front of them. Ex. 0064, 0065, 0066, etc.

64 00-080 CPD (Central Police Desk)
65 00-081 EWR PAT (Patrol)
66 00-082 EWR ARFF (Aircraft Rescue & Fire Fighting)
67 00-083 EWR TAC 1
68 00-084 EWR TAC 2
69 00-085 EWR TAC 3
70 00-086 EWR TAC 4
71 00-087 Area Wide TAC

JFK (John F Kennedy Airport) Talkgroups []

DEC AFS Description
96 00-120 CPD (Central Police Desk)
97 00-121 JFK PAT (Patrol)
98 00-122 JFK ARFF (Aircraft Rescue & Fire Fighting)
99 00-123 JFK TAC 1
100 00-124 JFK TAC 2
101 00-125 JFK TAC 3
102 00-126 JFK TAC 4
103 00-127 Area Wide TAC
 
Last edited:

usnasa

Member
Joined
Apr 3, 2006
Messages
481
Location
Brooklyn NY
thank you very much sir thats why it changed from 00.080 0064 thanks so after i program it then i can just scan like always and it should pick it up ?
 

usnasa

Member
Joined
Apr 3, 2006
Messages
481
Location
Brooklyn NY
thanks very much i did it but i am not hearing them ? does the control chs and talk groups should be in one bank with other freq ? or should control chs and talkgroups should have one bank for themselves
 
Status
Not open for further replies.
Top