Pro-433 w/base & offsets

Status
Not open for further replies.

Liverdog

Member
Joined
Dec 19, 2002
Messages
308
Is it possible to program two different sets of base and offset frequencies in a pro-433 for a UHF, M-Type II system or is the scanner only capable of accepting the same sets (1, 2, 3) across all banks?

For example:

Bank 1 has:

1) 406.0, 12.5, 380
2) 410.1, 12.5, 415
3) blank

Can Bank 2 have a different set or are you stuck with Bank 1's offsets for the entire scanner?
 
Last edited:

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
23,705
Location
Bowie, Md.
I'm pretty sure that the base/offsets are specific for that 1 bank only - you could have a 2nd UHF system in another bank with different base/offsets

73 Mike
 

fmon

Silent Key Jan. 14, 2012
Joined
May 11, 2002
Messages
7,741
Location
Eclipse, Virginia
I'm pretty sure that the base/offsets are specific for that 1 bank only - you could have a 2nd UHF system in another bank with different base/offsets

73 Mike
Up to 10 systems and up to three tables per system. A multi site system will need each site in it's own bank.
 
Status
Not open for further replies.
Top