Pro-91 Volume Issue

Status
Not open for further replies.

Hotroddn19

Member
Joined
Sep 21, 2005
Messages
4
Hello,
I recently bought a pro-91, and I am having issues with the volume. It just doesn't get loud! I thought it was the speaker, but after replacing it, it sounds the same! When an external speaker is plugged into the headphone jack, it sounds fine. Any suggestions?


Thanks,
Andrew
Hotroddn19@aol.com
 

gmclam

Member
Premium Subscriber
Joined
Sep 15, 2006
Messages
6,335
Location
Fair Oaks, CA
Sounds like you've narrowed it down. Bad contacts on the headphone jack, a defective component between the headphone jack and speaker. Also check PCB traces and solder joints.
 

Hotroddn19

Member
Joined
Sep 21, 2005
Messages
4
Well.......

I think I fixed it, or rigged it. How ever you want to look at it. I soidered the speaker leads to the headphone jack on the board. The speaker now works great. It even shuts of the internal speaker when you plug in headphones!


Thanks all!

Andrew
 

intense

Member
Premium Subscriber
Joined
Jun 2, 2010
Messages
13
Location
San Luis Obispo
I think I fixed it, or rigged it. How ever you want to look at it. I soidered the speaker leads to the headphone jack on the board. The speaker now works great. It even shuts of the internal speaker when you plug in headphones!


Thanks all!

Andrew

Mine's doing the same after it was dropped how did you get it apart?
 
Status
Not open for further replies.
Top